Optical memory based on GeSbTe-O alloys

E. Morales-Sánchez, C. Rivera-Rodríguez, E. Prokhorov, Yu Kovalenko, J. González Hernandez

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

Resumen

The purpose of this study was to develop new active material for phase-change optical memory (Compact Disks) which would make it possible to record information with 3 or 4 levels of reflectivity and not only 2, as is the case now. With this goal in mind, the optical properties (reflectance) of Ge1Sb2Te4 films doped with oxygen were investigated. X-ray diffraction shows that the crystalline phase for films with 2-8% oxygen corresponds to a Ge1Sb2Te4 composition. However, the crystalline phase for films with more than 10% oxygen corresponds to Sb2Te3. This phase segregation in films containing more than 10% oxygen gives, as a result, an increase in nucleation times and in laser-induced crystallization times, making multilevel recording possible, that is to say, optical memory with ternary or quaternary code instead of just binary code.

Idioma originalInglés
Título de la publicación alojada2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005
Páginas416-418
Número de páginas3
DOI
EstadoPublicada - 2005
Publicado de forma externa
Evento2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005 - Mexico City, México
Duración: 7 sep. 20059 sep. 2005

Serie de la publicación

Nombre2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005
Volumen2005

Conferencia

Conferencia2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005
País/TerritorioMéxico
CiudadMexico City
Período7/09/059/09/05

Huella

Profundice en los temas de investigación de 'Optical memory based on GeSbTe-O alloys'. En conjunto forman una huella única.

Citar esto