Development of a sensing board for current and voltage AC tested with an oversampling technique

Jose Armando Olvera Balderas; Martin Aaron Trejo Estrella; Julio Cesar Sosa Savedra; Ruben Ortega Gonzalez

doi:10.1109/iCASAT48251.2019.9069528

Development of a sensing board for current and voltage AC tested with an oversampling technique

Jose Armando Olvera Balderas, Martin Aaron Trejo Estrella, Julio Cesar Sosa Savedra, Ruben Ortega Gonzalez

Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada (CICATA), Unidad Querétaro

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

Resumen

Monitoring electrical parameters like current and voltage has many typical applications since AC variable speed drives, static converters, battery supplied applications, etc. There are many devices that allow the measurement of these parameters and to acquire these parameters or any other in a digital system, we depend on characteristics of transducer and ADC. In this work we focus on the voltage and current transducers whose main characteristic is an accuracy less than 1%, while the ADC used was a conventional 10-bit one that any microcontroller can offer, to improve this, an oversampling technique is implemented. This combination presented a relative error less than 1% and 3% for voltage and current respectively.

Idioma original	Inglés
Título de la publicación alojada	2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019
Editorial	Institute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)	9781728131108
DOI	https://doi.org/10.1109/iCASAT48251.2019.9069528
Estado	Publicada - nov. 2019
Evento	2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019 - Queretaro, México Duración: 27 nov. 2019 → 28 nov. 2019

Serie de la publicación

Nombre	2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019

Conferencia

Conferencia	2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019
País/Territorio	México
Ciudad	Queretaro
Período	27/11/19 → 28/11/19

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

Acceder al documento

10.1109/iCASAT48251.2019.9069528

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Olvera Balderas, J. A., Aaron Trejo Estrella, M., Sosa Savedra, J. C., & Ortega Gonzalez, R. (2019). Development of a sensing board for current and voltage AC tested with an oversampling technique. En 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019 Artículo 9069528 (2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/iCASAT48251.2019.9069528

Olvera Balderas, Jose Armando ; Aaron Trejo Estrella, Martin ; Sosa Savedra, Julio Cesar et al. / Development of a sensing board for current and voltage AC tested with an oversampling technique. 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019. Institute of Electrical and Electronics Engineers Inc., 2019. (2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019).

@inproceedings{a6dfce17b37a4a32b8ea5034d5622a1b,

title = "Development of a sensing board for current and voltage AC tested with an oversampling technique",

abstract = "Monitoring electrical parameters like current and voltage has many typical applications since AC variable speed drives, static converters, battery supplied applications, etc. There are many devices that allow the measurement of these parameters and to acquire these parameters or any other in a digital system, we depend on characteristics of transducer and ADC. In this work we focus on the voltage and current transducers whose main characteristic is an accuracy less than 1%, while the ADC used was a conventional 10-bit one that any microcontroller can offer, to improve this, an oversampling technique is implemented. This combination presented a relative error less than 1% and 3% for voltage and current respectively.",

keywords = "Current and voltage measurement, Data acquisiion, Transducer",

author = "{Olvera Balderas}, {Jose Armando} and {Aaron Trejo Estrella}, Martin and {Sosa Savedra}, {Julio Cesar} and {Ortega Gonzalez}, Ruben",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019 ; Conference date: 27-11-2019 Through 28-11-2019",

year = "2019",

month = nov,

doi = "10.1109/iCASAT48251.2019.9069528",

language = "Ingl{\'e}s",

series = "2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019",

address = "Estados Unidos",

}

Olvera Balderas, JA, Aaron Trejo Estrella, M, Sosa Savedra, JC & Ortega Gonzalez, R 2019, Development of a sensing board for current and voltage AC tested with an oversampling technique. En 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019., 9069528, 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019, Institute of Electrical and Electronics Engineers Inc., 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019, Queretaro, México, 27/11/19. https://doi.org/10.1109/iCASAT48251.2019.9069528

Development of a sensing board for current and voltage AC tested with an oversampling technique. / Olvera Balderas, Jose Armando; Aaron Trejo Estrella, Martin; Sosa Savedra, Julio Cesar et al.
2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 9069528 (2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Development of a sensing board for current and voltage AC tested with an oversampling technique

AU - Olvera Balderas, Jose Armando

AU - Aaron Trejo Estrella, Martin

AU - Sosa Savedra, Julio Cesar

AU - Ortega Gonzalez, Ruben

PY - 2019/11

Y1 - 2019/11

N2 - Monitoring electrical parameters like current and voltage has many typical applications since AC variable speed drives, static converters, battery supplied applications, etc. There are many devices that allow the measurement of these parameters and to acquire these parameters or any other in a digital system, we depend on characteristics of transducer and ADC. In this work we focus on the voltage and current transducers whose main characteristic is an accuracy less than 1%, while the ADC used was a conventional 10-bit one that any microcontroller can offer, to improve this, an oversampling technique is implemented. This combination presented a relative error less than 1% and 3% for voltage and current respectively.

AB - Monitoring electrical parameters like current and voltage has many typical applications since AC variable speed drives, static converters, battery supplied applications, etc. There are many devices that allow the measurement of these parameters and to acquire these parameters or any other in a digital system, we depend on characteristics of transducer and ADC. In this work we focus on the voltage and current transducers whose main characteristic is an accuracy less than 1%, while the ADC used was a conventional 10-bit one that any microcontroller can offer, to improve this, an oversampling technique is implemented. This combination presented a relative error less than 1% and 3% for voltage and current respectively.

KW - Current and voltage measurement

KW - Data acquisiion

KW - Transducer

UR - http://www.scopus.com/inward/record.url?scp=85084670319&partnerID=8YFLogxK

U2 - 10.1109/iCASAT48251.2019.9069528

DO - 10.1109/iCASAT48251.2019.9069528

M3 - Contribución a la conferencia

AN - SCOPUS:85084670319

T3 - 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019

BT - 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019

Y2 - 27 November 2019 through 28 November 2019

ER -

Olvera Balderas JA, Aaron Trejo Estrella M, Sosa Savedra JC, Ortega Gonzalez R. Development of a sensing board for current and voltage AC tested with an oversampling technique. En 2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 9069528. (2019 IEEE International Conference on Applied Science and Advanced Technology, iCASAT 2019). doi: 10.1109/iCASAT48251.2019.9069528

Development of a sensing board for current and voltage AC tested with an oversampling technique

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto