Synthesis and characterization of nanocrystalline TiN powder by reactive milling

Joaquina Orea Lara, Heberto Balmori Ramírez

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

Resumen

TiN powder was obtained by reaction milling of a titanium powder in air. The Ti powder was milled in an attrition mill or a Spex mill. Characterization of the powders was carried out by means of chemical analysis, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The reaction took place in 12 h in the Spex mill. It took 96 h in the attrition mill to complete the reaction. The XRD results indicate that a cubic TiN-like phase crystalline structure was produced in the two mills, with a lattice parameter of 4.38 Å and 4.23 Å, respectively. The morphology of the obtained powders was nodular, with particle size within the nanometric size range.

Idioma originalInglés
Título de la publicación alojadaTechnical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, NSTI-Nanotech, Nanotechnology 2008
Páginas955-958
Número de páginas4
EstadoPublicada - 2008
Publicado de forma externa
Evento2008 NSTI Nanotechnology Conference and Trade Show, NSTI Nanotech 2008 Joint Meeting, Nanotechnology 2008 - Quebec City, QC, Estados Unidos
Duración: 1 jun. 20085 jun. 2008

Serie de la publicación

NombreTechnical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, NSTI-Nanotech, Nanotechnology 2008
Volumen1

Conferencia

Conferencia2008 NSTI Nanotechnology Conference and Trade Show, NSTI Nanotech 2008 Joint Meeting, Nanotechnology 2008
País/TerritorioEstados Unidos
CiudadQuebec City, QC
Período1/06/085/06/08

Huella

Profundice en los temas de investigación de 'Synthesis and characterization of nanocrystalline TiN powder by reactive milling'. En conjunto forman una huella única.

Citar esto