MoS 2 films formed by in-contact decomposition of water-soluble tetraalkylammonium thiomolybdates

Fernando Chiñas-Castillo, Javier Lara-Romero, Gabriel Alonso-Núñez, Juan De Dios Oscar Barceinas-Sánchez, Sergio Jiménez-Sandoval

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

15 Citas (Scopus)

Resumen

Synthesis and tribological evaluation of three tetraalkylammonium thiomolybdate (R 4N) 2MoS 4 (R = methyl, propyl, or ammonia) aqueous-based lubricant additives on a ball-on-disk tribometer was carried out for a steel-aluminum contact. Tests were performed at the same conditions of load, entrainment speed, sliding distance, temperature, and concentration of MoS 2 to compare the activity (lubrication effect) of the thiomolybdates prepared. A friction reduction is observed for the three salts compared to pure water; however, significant differences in friction coefficient are observed depending on the alkyl group. SEM/EDAX and Raman analysis of the wear tracks reveal the in-contact formation of a MoS 2-lubricating film, rich in molybdenum and sulfur.

Idioma originalInglés
Páginas (desde-hasta)155-161
Número de páginas7
PublicaciónTribology Letters
Volumen29
N.º2
DOI
EstadoPublicada - feb. 2008
Publicado de forma externa

Huella

Profundice en los temas de investigación de 'MoS 2 films formed by in-contact decomposition of water-soluble tetraalkylammonium thiomolybdates'. En conjunto forman una huella única.

Citar esto