TY - JOUR
T1 - Mesostructured CeO2 and Pd/CeO2 nanophases
T2 - Templated synthesis, crystalline structure and catalytic properties
AU - Zhang, J. H.
AU - Yang, Y. Q.
AU - Shen, J. M.
AU - Wang, J. A.
N1 - Funding Information:
Professor J.A. Wang would like to appreciate the financial support from the projects CONACyT (Grant No. 31282-u), FIES-IMP-IPN (Grant No. 98-29-III) and an international collaboration finding granted by CONACyT (Mexico)-NSF (China) (No. J200.489/2004). The authors thank Dr. M. Morán-Pineda in the Instituto Mexicano del Petroleo and Dr. D.R. Acosta in the National University of Mexico for their valuable technical assistance.
PY - 2005/8/2
Y1 - 2005/8/2
N2 - This work reports a ceria solid and Pd/ceria catalyst prepared through a surfactant-templated synthesis route used for simultaneous abasement of NO and CO emissions. The surface features, textural properties and crystalline structure of ceria and Pd/ceria catalyst were studied by means of thermogravimetric analysis (TGA), N2 physisorption isotherms and in situ Fourier transform infrared (FT-IR) spectroscopy, high resolution electron transmission microscopy (TEM) and X-ray diffraction (XRD) techniques. In the calcination procedure, part of the adsorbed water on the surface of the solid was derived into unidentate and bidentate hydroxyls associated with surface cationic ions of ceria. The surfactant cations were strongly interacted with the solid during the preparation, which induces defects formation in the crystalline structure of the annealed ceria. The retained surfactant in the solid could be combusted to yield CO2, water and organic molecules with a small amount of coke-like deposits. The resultant ceria showed mesoporous texture and cubic phase containing lattice defects in the crystalline structure. The Pd/CeO2 catalyst was very active for NO reduction via CO with a high selectivity to N2. A 100% NO conversion with a selectivity to 100% N2 was achieved over the Pd/ceria catalyst at a reaction temperature of 300 °C. The catalytic activity and selectivity of this catalyst are much superior to the catalysts of Pt or Rh supported on TiO2, Al2O3, TiO 2-Al2O3 and ZrO2-Al 2O3 prepared by a sol-gel method. A possible reaction mechanism of NO reduction by CO over the Pd/CeO2 catalyst was discussed.
AB - This work reports a ceria solid and Pd/ceria catalyst prepared through a surfactant-templated synthesis route used for simultaneous abasement of NO and CO emissions. The surface features, textural properties and crystalline structure of ceria and Pd/ceria catalyst were studied by means of thermogravimetric analysis (TGA), N2 physisorption isotherms and in situ Fourier transform infrared (FT-IR) spectroscopy, high resolution electron transmission microscopy (TEM) and X-ray diffraction (XRD) techniques. In the calcination procedure, part of the adsorbed water on the surface of the solid was derived into unidentate and bidentate hydroxyls associated with surface cationic ions of ceria. The surfactant cations were strongly interacted with the solid during the preparation, which induces defects formation in the crystalline structure of the annealed ceria. The retained surfactant in the solid could be combusted to yield CO2, water and organic molecules with a small amount of coke-like deposits. The resultant ceria showed mesoporous texture and cubic phase containing lattice defects in the crystalline structure. The Pd/CeO2 catalyst was very active for NO reduction via CO with a high selectivity to N2. A 100% NO conversion with a selectivity to 100% N2 was achieved over the Pd/ceria catalyst at a reaction temperature of 300 °C. The catalytic activity and selectivity of this catalyst are much superior to the catalysts of Pt or Rh supported on TiO2, Al2O3, TiO 2-Al2O3 and ZrO2-Al 2O3 prepared by a sol-gel method. A possible reaction mechanism of NO reduction by CO over the Pd/CeO2 catalyst was discussed.
KW - CO oxidation
KW - Catalyst
KW - NO reduction
KW - Pd/ceria
KW - Surfactant-templated synthesis
UR - http://www.scopus.com/inward/record.url?scp=21644486801&partnerID=8YFLogxK
U2 - 10.1016/j.molcata.2005.04.056
DO - 10.1016/j.molcata.2005.04.056
M3 - Artículo
SN - 1381-1169
VL - 237
SP - 182
EP - 190
JO - Journal of Molecular Catalysis A: Chemical
JF - Journal of Molecular Catalysis A: Chemical
IS - 1-2
ER -