Implementation of a PCM control scheme in a multiport Boost converter for BMS applications

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

Resumen

This paper presents the implementation of a PCM control scheme in a multiport Boost converter for BMS applications. The 15-W converter is intended to properly monitor the SoC of two lithium-ion cells with a nominal voltage of 3.7 V and 2000 mAh. The inner current control and the outer voltage control are implemented in a low-cost 32-bit 200 MHz microcontroller using mixed-signal strategies for both converters, which are phase shifted 180° using a Peak Current Control scheme at 60 kHz. The system is experimentally verified by measuring the total discharge of a battery operating in a closed-loop fashion and the results are validated and compared with the measurements of a professional data logger.

Idioma originalInglés
Título de la publicación alojadaProceedings - 2022 IEEE 4th Global Power, Energy and Communication Conference, GPECOM 2022
EditorialInstitute of Electrical and Electronics Engineers Inc.
Páginas101-106
Número de páginas6
ISBN (versión digital)9781665469258
DOI
EstadoPublicada - 2022
Evento4th IEEE Global Power, Energy and Communication Conference, GPECOM 2022 - Cappadocia, Turquía
Duración: 14 jun. 202217 jun. 2022

Serie de la publicación

NombreProceedings - 2022 IEEE 4th Global Power, Energy and Communication Conference, GPECOM 2022

Conferencia

Conferencia4th IEEE Global Power, Energy and Communication Conference, GPECOM 2022
País/TerritorioTurquía
CiudadCappadocia
Período14/06/2217/06/22

Huella

Profundice en los temas de investigación de 'Implementation of a PCM control scheme in a multiport Boost converter for BMS applications'. En conjunto forman una huella única.

Citar esto