TY - GEN
T1 - Electroless nickel plating process in electrodes for use in oxi-hydrogen reactors
AU - Contreras-Lopez, L. F.
AU - Hernandez-Hernandez, E. M.
AU - Cortes-Escobedo, C. A.
AU - Santa Ana-Tellez, J.
AU - Martinez-Velazco, W.
N1 - Publisher Copyright:
© 2016 IEEE.
PY - 2016/7/2
Y1 - 2016/7/2
N2 - It was found that when a mixture of hydrogen and oxygen in the fuel gas stream is injected, either gasoline or diesel, it increases its combustion efficiency decreasing at the same time the pollutant emissions of fuels without burning into the atmosphere and saving from 10 up to 30% on fuel. In order to obtain this gaseous mixture, reactors oxyhydrogen operating in conditions in which the engine operates has been developed. A part important of these reactors are the electrodes that should count with characteristics as high resistance to the corrosion, high electronic conductivity and high surface area. This work presents the construction of electrodes for oxyhydrogen reactors with different characteristics, allowing to increase life time while maintaining the efficiency of the reactors. For this electroless nickel plating method was select to deposit a thick coating on aluminum and brass substrates at different bath times. Structural and morphological characterization is presented and discussed. The results obtained by X-ray diffraction and optical microscopy, showed that both materials to favor the deposition of nickel. It can be concluded that the time of deposition of 4, 6 and 8 hours not significantly influences the amount of nickel deposited on the material in reference with X-ray analysis.
AB - It was found that when a mixture of hydrogen and oxygen in the fuel gas stream is injected, either gasoline or diesel, it increases its combustion efficiency decreasing at the same time the pollutant emissions of fuels without burning into the atmosphere and saving from 10 up to 30% on fuel. In order to obtain this gaseous mixture, reactors oxyhydrogen operating in conditions in which the engine operates has been developed. A part important of these reactors are the electrodes that should count with characteristics as high resistance to the corrosion, high electronic conductivity and high surface area. This work presents the construction of electrodes for oxyhydrogen reactors with different characteristics, allowing to increase life time while maintaining the efficiency of the reactors. For this electroless nickel plating method was select to deposit a thick coating on aluminum and brass substrates at different bath times. Structural and morphological characterization is presented and discussed. The results obtained by X-ray diffraction and optical microscopy, showed that both materials to favor the deposition of nickel. It can be concluded that the time of deposition of 4, 6 and 8 hours not significantly influences the amount of nickel deposited on the material in reference with X-ray analysis.
KW - coating
KW - electrodes
KW - nickel plating process
KW - reactor oxi-hydrogen
UR - http://www.scopus.com/inward/record.url?scp=85022198570&partnerID=8YFLogxK
U2 - 10.1109/CSMH.2016.7947662
DO - 10.1109/CSMH.2016.7947662
M3 - Contribución a la conferencia
AN - SCOPUS:85022198570
T3 - 2016 16th International Congress of the Mexican Hydrogen Society, CSMH 2016
BT - 2016 16th International Congress of the Mexican Hydrogen Society, CSMH 2016
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 16th International Congress of the Mexican Hydrogen Society, CSMH 2016
Y2 - 26 September 2016 through 30 September 2016
ER -