TY - JOUR
T1 - Design, Construction, and Operation of a High-Energy Mill for Handling Magnesium Powder
AU - Paredes Rojas, J. C.
AU - Álvarez Ramírez, L. E.
AU - Urriolagoitia Sosa, G.
AU - Torres San Miguel, C. R.
AU - Romero Ángeles, B.
AU - Leal Naranjo, J. A.
AU - Urriolagoitia Calderón, G. M.
AU - Thipprakmas, Sutasn
N1 - Publisher Copyright:
© 2019 J. C. Paredes Rojas et al.
PY - 2019
Y1 - 2019
N2 - A high-energy mill was designed and built with the purpose of processing magnesium (Mg) powders. The main characteristics of the mill are grinding capacity of 1 kg and demolition elements of 10 kg; it has a distributed form to the interior ten blades of similar geometry, six of which are of the same size and four of them were increased in length in order to avoid the accumulation of the ground material. It has a jacket with a diameter of 240 mm as a cooling system to prevent high temperatures during grinding and possible chemical reactions; likewise, type 304 stainless steel was used for its construction. 10 mills were made during a period of 4, 6, and 8 hours, in order to obtain microparticles; with these particles, an analysis of X-ray spectroscopy was made to verify their physical and chemical characteristics. The outcome shows powder particles with dimensions of 0.1-4 mm, which will be used to the storage and handling hydrogen in the solid state (MgH 2 ).
AB - A high-energy mill was designed and built with the purpose of processing magnesium (Mg) powders. The main characteristics of the mill are grinding capacity of 1 kg and demolition elements of 10 kg; it has a distributed form to the interior ten blades of similar geometry, six of which are of the same size and four of them were increased in length in order to avoid the accumulation of the ground material. It has a jacket with a diameter of 240 mm as a cooling system to prevent high temperatures during grinding and possible chemical reactions; likewise, type 304 stainless steel was used for its construction. 10 mills were made during a period of 4, 6, and 8 hours, in order to obtain microparticles; with these particles, an analysis of X-ray spectroscopy was made to verify their physical and chemical characteristics. The outcome shows powder particles with dimensions of 0.1-4 mm, which will be used to the storage and handling hydrogen in the solid state (MgH 2 ).
UR - http://www.scopus.com/inward/record.url?scp=85062324912&partnerID=8YFLogxK
U2 - 10.1155/2019/6278365
DO - 10.1155/2019/6278365
M3 - Artículo
SN - 1024-123X
VL - 2019
JO - Mathematical Problems in Engineering
JF - Mathematical Problems in Engineering
M1 - 6278365
ER -