Densification and microstructure of spark plasma sintered 7YSZ–Gd 2 O 3 ceramic nano-composites

E. Serrano Pérez, H. Martinez Gutierrez, K. J. Martinez Gonzalez, E. Marín Moares, F. Juárez López

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

14 Citas (Scopus)

Resumen

Spark plasma sintering (SPS) technique was used to densify 7 mol% yttria-stabilized zirconia (7YSZ) powder with Gd 2 O 3 -particles, at temperatures ranging between 1000 and 1200 °C. Fine dispersion of Gd 2 O 3 -particles into a full-densified matrix was achieved. Shrinkage and microstructure, as well as porosity were investigated. The fine Gd 2 O 3 -particles distributed into 7YSZ matrix have influence over the sintering consolidation and final microstructure. An increment in the spark plasma sintering temperature around 70 °C is detected when Gd 2 O 3 particles are present. The thermal characterization was performed using the photothermal infrared radiometry technique. Both thermal diffusivity and thermal conductivity display a similar sigmoidal (Boltzmann type) behavior with the Gd 2 O 3 concentration in the samples.

Idioma originalInglés
Páginas (desde-hasta)266-275
Número de páginas10
PublicaciónJournal of Asian Ceramic Societies
Volumen5
N.º3
DOI
EstadoPublicada - sep. 2017

Huella

Profundice en los temas de investigación de 'Densification and microstructure of spark plasma sintered 7YSZ–Gd 2 O 3 ceramic nano-composites'. En conjunto forman una huella única.

Citar esto