Resumen
The abrasive wear of 8620 borided steel under aqueous conditions was investigated. Bonding thermochemical treatment of the steel specimens was carried out at 900°C for 4 h in order to increase hardness and wear resistance. In these experiments, a suspension of silica sand (1.5 dm3) and water (0.94 dm3), was employed as a very agressive abrasive wear agent.The tribometer used in the abrasion tests, of the wet-sand/rubber-wheel type, was designed and constructed by the first three authors according to the ASTM G-105 specification. Weight loss of borided specimens was measured as a function of the number of cycles, and the sliding distance. These results are discussed and compared with those obtained for non-borided specimens. Significant improvement in the wear resistance of the borided steel were observed when compared to the non-borided one.
Idioma original | Inglés |
---|---|
Páginas (desde-hasta) | 1343-1348 |
Número de páginas | 6 |
Publicación | Materials Science Forum |
Volumen | 426-432 |
N.º | 2 |
DOI | |
Estado | Publicada - 2003 |
Evento | Thermec 2003 Processing and Manufacturing of Advanced Materials - Madrid, Espana Duración: 7 jul. 2003 → 11 jul. 2003 |