Analysis and design method for high frequency self-oscillating electronic ballasts

Efrén Flores-García; Mario Ponce-Silva; Luis G. Vela; Mario A. Juarez; Ismael Araujo

doi:10.1109/ECCE.2010.5618279

Analysis and design method for high frequency self-oscillating electronic ballasts

Efrén Flores-García, Mario Ponce-Silva, Luis G. Vela, Mario A. Juarez, Ismael Araujo

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

4 Citas (Scopus)

Resumen

In this paper a simple method to design and improve the performance of high frequency self-oscillating electronic ballasts is presented. The proposed method is based on the describing function method and allows minimizing the parasitic elements effects presented above 200 kHz by considering the gate-source parasitic capacitance of power Mosfets and the switching delay times. its main advantage is a better operating frequency approximation and hence a better performance of the ballast. Experimental results of the proposed method are compared against a conventional method in a frequency range of 200 kHz to 2 MHz, showing the feasibility of the proposed method.

Idioma original	Inglés
Título de la publicación alojada	2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings
Páginas	1343-1346
Número de páginas	4
DOI	https://doi.org/10.1109/ECCE.2010.5618279
Estado	Publicada - 2010
Publicado de forma externa	Sí
Evento	2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Atlanta, GA, Estados Unidos Duración: 12 sep. 2010 → 16 sep. 2010

Serie de la publicación

Nombre	2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings

Conferencia

Conferencia	2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010
País/Territorio	Estados Unidos
Ciudad	Atlanta, GA
Período	12/09/10 → 16/09/10

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

Acceder al documento

10.1109/ECCE.2010.5618279

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Flores-García, E., Ponce-Silva, M., Vela, L. G., Juarez, M. A., & Araujo, I. (2010). Analysis and design method for high frequency self-oscillating electronic ballasts. En 2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings (pp. 1343-1346). Artículo 5618279 (2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings). https://doi.org/10.1109/ECCE.2010.5618279

@inproceedings{cb6a59886bc54691a8a67878c1c23747,

title = "Analysis and design method for high frequency self-oscillating electronic ballasts",

abstract = "In this paper a simple method to design and improve the performance of high frequency self-oscillating electronic ballasts is presented. The proposed method is based on the describing function method and allows minimizing the parasitic elements effects presented above 200 kHz by considering the gate-source parasitic capacitance of power Mosfets and the switching delay times. its main advantage is a better operating frequency approximation and hence a better performance of the ballast. Experimental results of the proposed method are compared against a conventional method in a frequency range of 200 kHz to 2 MHz, showing the feasibility of the proposed method.",

author = "Efr{\'e}n Flores-Garc{\'i}a and Mario Ponce-Silva and Vela, {Luis G.} and Juarez, {Mario A.} and Ismael Araujo",

year = "2010",

doi = "10.1109/ECCE.2010.5618279",

language = "Ingl{\'e}s",

isbn = "9781424452866",

series = "2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings",

pages = "1343--1346",

booktitle = "2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings",

note = "2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010 ; Conference date: 12-09-2010 Through 16-09-2010",

}

Flores-García, E, Ponce-Silva, M, Vela, LG, Juarez, MA & Araujo, I 2010, Analysis and design method for high frequency self-oscillating electronic ballasts. En 2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings., 5618279, 2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings, pp. 1343-1346, 2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010, Atlanta, GA, Estados Unidos, 12/09/10. https://doi.org/10.1109/ECCE.2010.5618279

Analysis and design method for high frequency self-oscillating electronic ballasts. / Flores-García, Efrén; Ponce-Silva, Mario; Vela, Luis G. et al.
2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings. 2010. p. 1343-1346 5618279 (2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Analysis and design method for high frequency self-oscillating electronic ballasts

AU - Flores-García, Efrén

AU - Ponce-Silva, Mario

AU - Vela, Luis G.

AU - Juarez, Mario A.

AU - Araujo, Ismael

PY - 2010

Y1 - 2010

N2 - In this paper a simple method to design and improve the performance of high frequency self-oscillating electronic ballasts is presented. The proposed method is based on the describing function method and allows minimizing the parasitic elements effects presented above 200 kHz by considering the gate-source parasitic capacitance of power Mosfets and the switching delay times. its main advantage is a better operating frequency approximation and hence a better performance of the ballast. Experimental results of the proposed method are compared against a conventional method in a frequency range of 200 kHz to 2 MHz, showing the feasibility of the proposed method.

AB - In this paper a simple method to design and improve the performance of high frequency self-oscillating electronic ballasts is presented. The proposed method is based on the describing function method and allows minimizing the parasitic elements effects presented above 200 kHz by considering the gate-source parasitic capacitance of power Mosfets and the switching delay times. its main advantage is a better operating frequency approximation and hence a better performance of the ballast. Experimental results of the proposed method are compared against a conventional method in a frequency range of 200 kHz to 2 MHz, showing the feasibility of the proposed method.

UR - http://www.scopus.com/inward/record.url?scp=78650138434&partnerID=8YFLogxK

U2 - 10.1109/ECCE.2010.5618279

DO - 10.1109/ECCE.2010.5618279

M3 - Contribución a la conferencia

AN - SCOPUS:78650138434

SN - 9781424452866

T3 - 2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings

SP - 1343

EP - 1346

BT - 2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings

T2 - 2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010

Y2 - 12 September 2010 through 16 September 2010

ER -

Analysis and design method for high frequency self-oscillating electronic ballasts

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto