TY - JOUR
T1 - An approach to the initialization of dynamic induction motor models
AU - Ruiz-Vega, Daniel
AU - Olivares, Tomás I.Asiaín
AU - Salinas, Daniel Olguín
N1 - Funding Information:
Manuscript received December 6, 2000; revised February 8, 2002. This work was supported in part by the Consejo Nacional de Ciencia y Tecnología (CONACYT). D. Ruiz-Vega is with the University of Liège, Liège B4000, Belgium (e-mail: ruiz@montefiore.ulg.ac.be). T. I. A. Olivares and D. O. Salinas are with Escuela Superior de Ingeniería Mecánica y Eléctrica, Instituto Politécnico Nacional, México D.F., México (e-mail: dolguin47@yahoo.com). Publisher Item Identifier 10.1109/TPWRS.2002.800919.
PY - 2002/8
Y1 - 2002/8
N2 - This paper proposes a steady state method as a solution to the problem of initializing the dynamic models of induction motors in transient stability studies. The results of the proposed method are compared to those obtained by two conventional initialization methods that are used in current production grade simulation programs, in a test power system that includes an industrial subsystem with a significant amount of induction motor loads. It is also shown in this paper that using a correct initialization method for these dynamic devices is important, because the choice of the method can modify the results of the dynamic time-domain simulation, and therefore the assessment of power system stability.
AB - This paper proposes a steady state method as a solution to the problem of initializing the dynamic models of induction motors in transient stability studies. The results of the proposed method are compared to those obtained by two conventional initialization methods that are used in current production grade simulation programs, in a test power system that includes an industrial subsystem with a significant amount of induction motor loads. It is also shown in this paper that using a correct initialization method for these dynamic devices is important, because the choice of the method can modify the results of the dynamic time-domain simulation, and therefore the assessment of power system stability.
KW - Induction motor models
KW - Numerical initialization
KW - Power flow methods
KW - Transient stability simulation
UR - http://www.scopus.com/inward/record.url?scp=0036699005&partnerID=8YFLogxK
U2 - 10.1109/TPWRS.2002.800919
DO - 10.1109/TPWRS.2002.800919
M3 - Artículo
SN - 0885-8950
VL - 17
SP - 747
EP - 751
JO - IEEE Transactions on Power Systems
JF - IEEE Transactions on Power Systems
IS - 3
ER -