36-pulse hybrid ripple injection for high-performance aerospace rectifiers

F. Javier Chivite-Zabalza, Andrew J. Forsyth, Ismael Araujo-Vargas

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

29 Citas (Scopus)

Resumen

This paper presents a three-phase voltage-source 36-pulse converter that draws almost sinusoidal currents. The converter results from the combination of a series-connected 12-pulse voltage-source rectifier with a passive voltage-injection circuit and a bidirectional switch, referred to as hybrid injection. The voltage-injection circuit uses a single-phase rectifier bridge and a single-phase transformer. Both the voltage-injection circuit and the bidirectional switch operate at six times the supply frequency and have a low rating. In this paper, the converter operation is explained and analyzed. Subsequently, the converter is evaluated experimentally using a 4-kW 400-Hz prototype, where the THDI of the line currents was measured to be below 1.2%.

Idioma originalInglés
Páginas (desde-hasta)992-999
Número de páginas8
PublicaciónIEEE Transactions on Industry Applications
Volumen45
N.º3
DOI
EstadoPublicada - 2009

Huella

Profundice en los temas de investigación de '36-pulse hybrid ripple injection for high-performance aerospace rectifiers'. En conjunto forman una huella única.

Citar esto