Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer

Mónica Vuelvas Trinidad; Luis M.Reséndiz Mendoza; Victor Cabrera Arenas; Magali Estrada Del Cueto

doi:10.1109/ICEEE.2014.6978294

Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer

Mónica Vuelvas Trinidad, Luis M.Reséndiz Mendoza, Victor Cabrera Arenas, Magali Estrada Del Cueto

Unidad Profesional Interdisciplinaria de Ingeniería y Tecnologías Avanzadas (UPIITA)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

We have fabricated polyfluorene-based polymer light emitting diodes (PLEDs), in which a sol-gel TiOx layer introduced between the polymer and an eutectic alloy Woods metal cathode to increase device performance, maintaining low temperature and low cost fabrication process. The emission of the PFO/TiOx PLEDs showed a red shift of 11nm with respect to the PLEDs without TiOx.

Original language	English
Title of host publication	2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781479962310
DOIs	https://doi.org/10.1109/ICEEE.2014.6978294
State	Published - 2014
Event	2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014 - Ciudad del Carmen, Mexico Duration: 29 Sep 2014 → 3 Oct 2014

Publication series

Name	2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014

Conference

Conference	2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014
Country/Territory	Mexico
City	Ciudad del Carmen
Period	29/09/14 → 3/10/14

Keywords

PFO
PLED
TIOx

Access to Document

10.1109/ICEEE.2014.6978294

Cite this

Trinidad, M. V., Mendoza, L. M. R., Arenas, V. C., & Del Cueto, M. E. (2014). Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer. In 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014 Article 6978294 (2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEEE.2014.6978294

Trinidad, Mónica Vuelvas ; Mendoza, Luis M.Reséndiz ; Arenas, Victor Cabrera et al. / Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer. 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. (2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014).

@inproceedings{cb8478ecf0a14850a21add2420298cef,

title = "Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer",

abstract = "We have fabricated polyfluorene-based polymer light emitting diodes (PLEDs), in which a sol-gel TiOx layer introduced between the polymer and an eutectic alloy Woods metal cathode to increase device performance, maintaining low temperature and low cost fabrication process. The emission of the PFO/TiOx PLEDs showed a red shift of 11nm with respect to the PLEDs without TiOx.",

keywords = "PFO, PLED, TIOx",

author = "Trinidad, {M{\'o}nica Vuelvas} and Mendoza, {Luis M.Res{\'e}ndiz} and Arenas, {Victor Cabrera} and {Del Cueto}, {Magali Estrada}",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014 ; Conference date: 29-09-2014 Through 03-10-2014",

year = "2014",

doi = "10.1109/ICEEE.2014.6978294",

language = "Ingl{\'e}s",

series = "2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014",

address = "Estados Unidos",

}

Trinidad, MV, Mendoza, LMR , Arenas, VC & Del Cueto, ME 2014, Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer. in 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014., 6978294, 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014, Institute of Electrical and Electronics Engineers Inc., 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014, Ciudad del Carmen, Mexico, 29/09/14. https://doi.org/10.1109/ICEEE.2014.6978294

Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer. / Trinidad, Mónica Vuelvas; Mendoza, Luis M.Reséndiz ; Arenas, Victor Cabrera et al.
2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. 6978294 (2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer

AU - Trinidad, Mónica Vuelvas

AU - Mendoza, Luis M.Reséndiz

AU - Arenas, Victor Cabrera

AU - Del Cueto, Magali Estrada

PY - 2014

Y1 - 2014

N2 - We have fabricated polyfluorene-based polymer light emitting diodes (PLEDs), in which a sol-gel TiOx layer introduced between the polymer and an eutectic alloy Woods metal cathode to increase device performance, maintaining low temperature and low cost fabrication process. The emission of the PFO/TiOx PLEDs showed a red shift of 11nm with respect to the PLEDs without TiOx.

AB - We have fabricated polyfluorene-based polymer light emitting diodes (PLEDs), in which a sol-gel TiOx layer introduced between the polymer and an eutectic alloy Woods metal cathode to increase device performance, maintaining low temperature and low cost fabrication process. The emission of the PFO/TiOx PLEDs showed a red shift of 11nm with respect to the PLEDs without TiOx.

KW - PFO

KW - PLED

KW - TIOx

UR - http://www.scopus.com/inward/record.url?scp=84938789977&partnerID=8YFLogxK

U2 - 10.1109/ICEEE.2014.6978294

DO - 10.1109/ICEEE.2014.6978294

M3 - Contribución a la conferencia

AN - SCOPUS:84938789977

T3 - 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014

BT - 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014

Y2 - 29 September 2014 through 3 October 2014

ER -

Trinidad MV, Mendoza LMR , Arenas VC, Del Cueto ME. Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer. In 2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014. Institute of Electrical and Electronics Engineers Inc. 2014. 6978294. (2014 11th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2014). doi: 10.1109/ICEEE.2014.6978294

Polyfluorene-based light-emitting diodes using TiOx as an electron injection layer

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this