Nanostructure formation during relatively high temperature growth of Mn-doped GaAs by molecular beam epitaxy

A. Del Río-De Santiago, V. H. Méndez-García, I. Martínez-Velis, Y. L. Casallas-Moreno, E. López-Luna, A. Yu Gorbatchev, M. López-López, E. Cruz-Hernández

Research output: Contribution to journalArticlepeer-review

4 Scopus citations

Abstract

In the present work, we report on molecular beam epitaxy growth of Mn-doped GaAs films at the relatively high temperature (HT) of 530 °C. We found that by increasing the Mn atomic percent, Mn%, from 0.01 to 0.2, the surface morphology of the samples is strongly influenced and changes from planar to corrugated for Mn% values from 0.01 to 0.05, corresponding to nanostructures on the surface with dimensions of 200-300 nm and with the shape of leave, to nanowire-like structures for Mn% values above 0.05. From reflection high-energy electron diffraction patterns, we observed the growth mode transition from two- to three-dimensional occurring at a Mn% exceeding 0.05. The optical and electrical properties were obtained from photoluminescence (PL) and Hall effect measurements, respectively. For the higher Mn concentration, besides the Mn related transitions at approximately 1.41 eV, PL spectra sharp peaks are present between 1.43 and 1.49 eV, which we related to the coexistence of zinc blende and wurtzite phases in the nanowire-like structures of this sample. At Mn% of 0.04, an increase of the carrier mobility up to a value of 1.1 × 10 3 cm 2 /Vs at 77 K was found, then decreases as Mn% is further increased due to the strengthening of the ionized impurity scattering.

Original languageEnglish
Pages (from-to)92-95
Number of pages4
JournalApplied Surface Science
Volume333
DOIs
StatePublished - 1 Apr 2015
Externally publishedYes

Keywords

  • Electrical properties
  • GaMnAs
  • High temperature
  • MBE
  • Nanostructures
  • Photoluminescence

Fingerprint

Dive into the research topics of 'Nanostructure formation during relatively high temperature growth of Mn-doped GaAs by molecular beam epitaxy'. Together they form a unique fingerprint.

Cite this