Modeling of surface composition dynamics in the ITER divertor region

Martin Nieto-Pérez, G. Ramos, Jean Paul Allain

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The formation of mixed materials in the ITER divertor region is a critical materials issue that is expected tohave a profound effect on the operation of the machine. This is particularly true for the divertor, the component where most of the energy is deposited during ITER operation. The divertor is made up of three tungsten domes and two vertical plates (inboard and outboard) which will be manufactured with composite carbon fiber according to the latest design. In the case of the first wall, the plasma-exposed surface is made out of beryllium; some of this beryllium is eroded from the first wall and finds its way into the divertor region, where it may strike the carbon vertical plates and get implanted or deposited. Having beryllium in the divertor enhances tritium trapping via codeposition, hence reducing the net available fuel for the reactor; on the other hand, there is evidence of carbon chemical erosion suppression. In this paper, the dynamic composition of a carbon surface under simultaneous bombardment by deuterium, tritium, and beryllium ions is studied. Both carbon and beryllium can redeposit on the target once eroded, so the source of ions receives feedback from the eroded material. Simulation results show that both the partial sputtering of Be and C atoms as well as the bombarding energy play an important role in Be accumulation on the vertical target plate, which can reach up to 50% near the surface. The results also show that the contribution of redeposited species may become so large that the DT bombarding flux may drop to 70% of the incident species.

Original languageEnglish
Pages (from-to)414-418
Number of pages5
JournalIEEE Transactions on Plasma Science
Volume38
Issue number3 PART 1
DOIs
StatePublished - 1 Mar 2010

Fingerprint

beryllium
carbon
tritium
domes
carbon fibers
erosion
bombardment
deuterium
tungsten
ions
sputtering
trapping
reactors
retarding
composite materials
energy
atoms
simulation

Keywords

  • Beryllium
  • Carbon
  • Divertor
  • ITER
  • Mixed materials
  • Modeling

Cite this

Nieto-Pérez, Martin ; Ramos, G. ; Allain, Jean Paul. / Modeling of surface composition dynamics in the ITER divertor region. In: IEEE Transactions on Plasma Science. 2010 ; Vol. 38, No. 3 PART 1. pp. 414-418.
@article{895c7e713d054a408785f754762d395b,
title = "Modeling of surface composition dynamics in the ITER divertor region",
abstract = "The formation of mixed materials in the ITER divertor region is a critical materials issue that is expected tohave a profound effect on the operation of the machine. This is particularly true for the divertor, the component where most of the energy is deposited during ITER operation. The divertor is made up of three tungsten domes and two vertical plates (inboard and outboard) which will be manufactured with composite carbon fiber according to the latest design. In the case of the first wall, the plasma-exposed surface is made out of beryllium; some of this beryllium is eroded from the first wall and finds its way into the divertor region, where it may strike the carbon vertical plates and get implanted or deposited. Having beryllium in the divertor enhances tritium trapping via codeposition, hence reducing the net available fuel for the reactor; on the other hand, there is evidence of carbon chemical erosion suppression. In this paper, the dynamic composition of a carbon surface under simultaneous bombardment by deuterium, tritium, and beryllium ions is studied. Both carbon and beryllium can redeposit on the target once eroded, so the source of ions receives feedback from the eroded material. Simulation results show that both the partial sputtering of Be and C atoms as well as the bombarding energy play an important role in Be accumulation on the vertical target plate, which can reach up to 50{\%} near the surface. The results also show that the contribution of redeposited species may become so large that the DT bombarding flux may drop to 70{\%} of the incident species.",
keywords = "Beryllium, Carbon, Divertor, ITER, Mixed materials, Modeling",
author = "Martin Nieto-P{\'e}rez and G. Ramos and Allain, {Jean Paul}",
year = "2010",
month = "3",
day = "1",
doi = "10.1109/TPS.2009.2039006",
language = "Ingl{\'e}s",
volume = "38",
pages = "414--418",
journal = "IEEE Transactions on Plasma Science",
issn = "0093-3813",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3 PART 1",

}

Modeling of surface composition dynamics in the ITER divertor region. / Nieto-Pérez, Martin; Ramos, G.; Allain, Jean Paul.

In: IEEE Transactions on Plasma Science, Vol. 38, No. 3 PART 1, 01.03.2010, p. 414-418.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Modeling of surface composition dynamics in the ITER divertor region

AU - Nieto-Pérez, Martin

AU - Ramos, G.

AU - Allain, Jean Paul

PY - 2010/3/1

Y1 - 2010/3/1

N2 - The formation of mixed materials in the ITER divertor region is a critical materials issue that is expected tohave a profound effect on the operation of the machine. This is particularly true for the divertor, the component where most of the energy is deposited during ITER operation. The divertor is made up of three tungsten domes and two vertical plates (inboard and outboard) which will be manufactured with composite carbon fiber according to the latest design. In the case of the first wall, the plasma-exposed surface is made out of beryllium; some of this beryllium is eroded from the first wall and finds its way into the divertor region, where it may strike the carbon vertical plates and get implanted or deposited. Having beryllium in the divertor enhances tritium trapping via codeposition, hence reducing the net available fuel for the reactor; on the other hand, there is evidence of carbon chemical erosion suppression. In this paper, the dynamic composition of a carbon surface under simultaneous bombardment by deuterium, tritium, and beryllium ions is studied. Both carbon and beryllium can redeposit on the target once eroded, so the source of ions receives feedback from the eroded material. Simulation results show that both the partial sputtering of Be and C atoms as well as the bombarding energy play an important role in Be accumulation on the vertical target plate, which can reach up to 50% near the surface. The results also show that the contribution of redeposited species may become so large that the DT bombarding flux may drop to 70% of the incident species.

AB - The formation of mixed materials in the ITER divertor region is a critical materials issue that is expected tohave a profound effect on the operation of the machine. This is particularly true for the divertor, the component where most of the energy is deposited during ITER operation. The divertor is made up of three tungsten domes and two vertical plates (inboard and outboard) which will be manufactured with composite carbon fiber according to the latest design. In the case of the first wall, the plasma-exposed surface is made out of beryllium; some of this beryllium is eroded from the first wall and finds its way into the divertor region, where it may strike the carbon vertical plates and get implanted or deposited. Having beryllium in the divertor enhances tritium trapping via codeposition, hence reducing the net available fuel for the reactor; on the other hand, there is evidence of carbon chemical erosion suppression. In this paper, the dynamic composition of a carbon surface under simultaneous bombardment by deuterium, tritium, and beryllium ions is studied. Both carbon and beryllium can redeposit on the target once eroded, so the source of ions receives feedback from the eroded material. Simulation results show that both the partial sputtering of Be and C atoms as well as the bombarding energy play an important role in Be accumulation on the vertical target plate, which can reach up to 50% near the surface. The results also show that the contribution of redeposited species may become so large that the DT bombarding flux may drop to 70% of the incident species.

KW - Beryllium

KW - Carbon

KW - Divertor

KW - ITER

KW - Mixed materials

KW - Modeling

UR - http://www.scopus.com/inward/record.url?scp=77955088745&partnerID=8YFLogxK

U2 - 10.1109/TPS.2009.2039006

DO - 10.1109/TPS.2009.2039006

M3 - Artículo

AN - SCOPUS:77955088745

VL - 38

SP - 414

EP - 418

JO - IEEE Transactions on Plasma Science

JF - IEEE Transactions on Plasma Science

SN - 0093-3813

IS - 3 PART 1

ER -