Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System

J. N. Alba-Juarez; R. Silva-Ortigoza; H. Taud; J. A. Rodriguez-Meza; V. M. Hernandez-Guzman

doi:10.1109/ICMEAE.2015.13

Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System

J. N. Alba-Juarez, R. Silva-Ortigoza, H. Taud, J. A. Rodriguez-Meza, V. M. Hernandez-Guzman

Centro de Innovación y Desarrollo Tecnológico en Cómputo (CIDETEC)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

In order to drive both positive and negative directions in the shaft of a DC motor connected to a DC/DC Buck power electronic converter, this paper presents a new topology of the DC/DC Buck power electronic converter-DC motor system. To this end, a full-bridge converter is placed between the Buck converter and the DC motor. The deduction of the mathematical model step-by-step, from applying Kirchhoff's voltage and current laws is shown. Later, an analysis in steady-state is presented, obtaining the system equilibrium point. Finally, numerical simulations are performed through Matlab-Simulink, showing the viability of our proposal.

Original language	English
Title of host publication	Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	139-144
Number of pages	6
ISBN (Electronic)	9781467383288
DOIs	https://doi.org/10.1109/ICMEAE.2015.13
State	Published - 2015
Event	International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015 - Cuernavaca, Morelos, Mexico Duration: 24 Nov 2015 → 27 Nov 2015

Publication series

Name	Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015

Conference

Conference	International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015
Country/Territory	Mexico
City	Cuernavaca, Morelos
Period	24/11/15 → 27/11/15

Keywords

DC motor
DC/DC Buck power electronic converter
FullBridge converter
Modeling
Simulation

Access to Document

10.1109/ICMEAE.2015.13

Cite this

Alba-Juarez, J. N., Silva-Ortigoza, R., Taud, H., Rodriguez-Meza, J. A., & Hernandez-Guzman, V. M. (2015). Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System. In Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015 (pp. 139-144). Article 7381589 (Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICMEAE.2015.13

Alba-Juarez, J. N. ; Silva-Ortigoza, R. ; Taud, H. et al. / Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System. Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 139-144 (Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015).

@inproceedings{e4401935b50d4cb1b8faedea4324b2fc,

title = "Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System",

abstract = "In order to drive both positive and negative directions in the shaft of a DC motor connected to a DC/DC Buck power electronic converter, this paper presents a new topology of the DC/DC Buck power electronic converter-DC motor system. To this end, a full-bridge converter is placed between the Buck converter and the DC motor. The deduction of the mathematical model step-by-step, from applying Kirchhoff's voltage and current laws is shown. Later, an analysis in steady-state is presented, obtaining the system equilibrium point. Finally, numerical simulations are performed through Matlab-Simulink, showing the viability of our proposal.",

keywords = "DC motor, DC/DC Buck power electronic converter, FullBridge converter, Modeling, Simulation",

author = "Alba-Juarez, {J. N.} and R. Silva-Ortigoza and H. Taud and Rodriguez-Meza, {J. A.} and Hernandez-Guzman, {V. M.}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015 ; Conference date: 24-11-2015 Through 27-11-2015",

year = "2015",

doi = "10.1109/ICMEAE.2015.13",

language = "Ingl{\'e}s",

series = "Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "139--144",

booktitle = "Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015",

address = "Estados Unidos",

}

Alba-Juarez, JN, Silva-Ortigoza, R , Taud, H, Rodriguez-Meza, JA & Hernandez-Guzman, VM 2015, Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System. in Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015., 7381589, Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015, Institute of Electrical and Electronics Engineers Inc., pp. 139-144, International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015, Cuernavaca, Morelos, Mexico, 24/11/15. https://doi.org/10.1109/ICMEAE.2015.13

Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System. / Alba-Juarez, J. N.; Silva-Ortigoza, R.; Taud, H. et al.
Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015. Institute of Electrical and Electronics Engineers Inc., 2015. p. 139-144 7381589 (Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System

AU - Alba-Juarez, J. N.

AU - Silva-Ortigoza, R.

AU - Taud, H.

AU - Rodriguez-Meza, J. A.

AU - Hernandez-Guzman, V. M.

PY - 2015

Y1 - 2015

N2 - In order to drive both positive and negative directions in the shaft of a DC motor connected to a DC/DC Buck power electronic converter, this paper presents a new topology of the DC/DC Buck power electronic converter-DC motor system. To this end, a full-bridge converter is placed between the Buck converter and the DC motor. The deduction of the mathematical model step-by-step, from applying Kirchhoff's voltage and current laws is shown. Later, an analysis in steady-state is presented, obtaining the system equilibrium point. Finally, numerical simulations are performed through Matlab-Simulink, showing the viability of our proposal.

AB - In order to drive both positive and negative directions in the shaft of a DC motor connected to a DC/DC Buck power electronic converter, this paper presents a new topology of the DC/DC Buck power electronic converter-DC motor system. To this end, a full-bridge converter is placed between the Buck converter and the DC motor. The deduction of the mathematical model step-by-step, from applying Kirchhoff's voltage and current laws is shown. Later, an analysis in steady-state is presented, obtaining the system equilibrium point. Finally, numerical simulations are performed through Matlab-Simulink, showing the viability of our proposal.

KW - DC motor

KW - DC/DC Buck power electronic converter

KW - FullBridge converter

KW - Modeling

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=84964403028&partnerID=8YFLogxK

U2 - 10.1109/ICMEAE.2015.13

DO - 10.1109/ICMEAE.2015.13

M3 - Contribución a la conferencia

AN - SCOPUS:84964403028

T3 - Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015

SP - 139

EP - 144

BT - Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015

Y2 - 24 November 2015 through 27 November 2015

ER -

Alba-Juarez JN, Silva-Ortigoza R , Taud H, Rodriguez-Meza JA, Hernandez-Guzman VM. Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System. In Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015. Institute of Electrical and Electronics Engineers Inc. 2015. p. 139-144. 7381589. (Proceedings - 2015 International Conference on Mechatronics, Electronics, and Automotive Engineering, ICMEAE 2015). doi: 10.1109/ICMEAE.2015.13

Modeling and Simulation for a DC/DC Buck Power Electronic Converter - DC Motor System

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this