Metodología para la manufactura de components en acero inoxidable 304 mediante el proceso de conformación en frío

Guillermo Urriolagoitia-Sosa; Mario Guerrero-Rivera; Beatriz Romero-Ángeles; Luis Héctor Hernández-Gómez; Christopher René Torres-San Miguel; Guillermo Urriolagoitia-Calderón

Metodología para la manufactura de components en acero inoxidable 304 mediante el proceso de conformación en frío

Translated title of the contribution: Methodology use by shaped in cold process for the manufacture of 304 stainless steel components

Guillermo Urriolagoitia-Sosa, Mario Guerrero-Rivera, Beatriz Romero-Ángeles, Luis Héctor Hernández-Gómez, Christopher René Torres-San Miguel, Guillermo Urriolagoitia-Calderón

Escuela Superior de Ingeniería Mecánica y Eléctrica (ESIME), Unidad Zacatenco

Research output: Contribution to journal › Article › peer-review

Abstract

This paper presents results for the establishment of criteria in the design of manufacturing tools by means of cold conformation of mechanical components made of stainless steel type 304. In addition values of hardness acquired by these pieces when they are obtained by cold working are reported. The results presented correspond to the performance of the designed tools and to the manufacture of self-propelling mechanical components. The starting point for the development of this work was to apply design criteria of tools for conformation in cold steels. It is important to keep in mind, that this type of steel increases its hardness when it is worn out in cold, this impedes the manufacture of components in series.

Translated title of the contribution	Methodology use by shaped in cold process for the manufacture of 304 stainless steel components
Original language	Spanish
Pages (from-to)	243-251
Number of pages	9
Journal	Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia
Volume	35
Issue number	3
State	Published - 2012

Cite this

@article{7d51a34600c543ada9811f9c63bc170b,

title = "Metodolog{\'i}a para la manufactura de components en acero inoxidable 304 mediante el proceso de conformaci{\'o}n en fr{\'i}o",

abstract = "This paper presents results for the establishment of criteria in the design of manufacturing tools by means of cold conformation of mechanical components made of stainless steel type 304. In addition values of hardness acquired by these pieces when they are obtained by cold working are reported. The results presented correspond to the performance of the designed tools and to the manufacture of self-propelling mechanical components. The starting point for the development of this work was to apply design criteria of tools for conformation in cold steels. It is important to keep in mind, that this type of steel increases its hardness when it is worn out in cold, this impedes the manufacture of components in series.",

keywords = "Hardness, Manufacture, Mechanical design, Shaped in cold, Stainless steel",

author = "Guillermo Urriolagoitia-Sosa and Mario Guerrero-Rivera and Beatriz Romero-{\'A}ngeles and Hern{\'a}ndez-G{\'o}mez, {Luis H{\'e}ctor} and {Torres-San Miguel}, {Christopher Ren{\'e}} and Guillermo Urriolagoitia-Calder{\'o}n",

year = "2012",

language = "Espa{\~n}ol",

volume = "35",

pages = "243--251",

journal = "Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia",

issn = "0254-0770",

number = "3",

}

Metodología para la manufactura de components en acero inoxidable 304 mediante el proceso de conformación en frío. / Urriolagoitia-Sosa, Guillermo; Guerrero-Rivera, Mario; Romero-Ángeles, Beatriz et al.
In: Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia, Vol. 35, No. 3, 2012, p. 243-251.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Metodología para la manufactura de components en acero inoxidable 304 mediante el proceso de conformación en frío

AU - Urriolagoitia-Sosa, Guillermo

AU - Guerrero-Rivera, Mario

AU - Romero-Ángeles, Beatriz

AU - Hernández-Gómez, Luis Héctor

AU - Torres-San Miguel, Christopher René

AU - Urriolagoitia-Calderón, Guillermo

PY - 2012

Y1 - 2012

N2 - This paper presents results for the establishment of criteria in the design of manufacturing tools by means of cold conformation of mechanical components made of stainless steel type 304. In addition values of hardness acquired by these pieces when they are obtained by cold working are reported. The results presented correspond to the performance of the designed tools and to the manufacture of self-propelling mechanical components. The starting point for the development of this work was to apply design criteria of tools for conformation in cold steels. It is important to keep in mind, that this type of steel increases its hardness when it is worn out in cold, this impedes the manufacture of components in series.

AB - This paper presents results for the establishment of criteria in the design of manufacturing tools by means of cold conformation of mechanical components made of stainless steel type 304. In addition values of hardness acquired by these pieces when they are obtained by cold working are reported. The results presented correspond to the performance of the designed tools and to the manufacture of self-propelling mechanical components. The starting point for the development of this work was to apply design criteria of tools for conformation in cold steels. It is important to keep in mind, that this type of steel increases its hardness when it is worn out in cold, this impedes the manufacture of components in series.

KW - Hardness

KW - Manufacture

KW - Mechanical design

KW - Shaped in cold

KW - Stainless steel

UR - http://www.scopus.com/inward/record.url?scp=84878002417&partnerID=8YFLogxK

M3 - Artículo

SN - 0254-0770

VL - 35

SP - 243

EP - 251

JO - Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia

JF - Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia

IS - 3

ER -

Metodología para la manufactura de components en acero inoxidable 304 mediante el proceso de conformación en frío

Abstract

Other files and links

Fingerprint

Cite this