Generación de inclusiones no metálicas y su efecto sobre el bloquee de boquillas de colada continua en aceros ultra bajo carbono estabilizados con titanio

O. Vega-Becerra; O. Reyes; F. Chávez-Alcalá; A. Romero-Serrano

doi:10.3989/revmetalm.2005.v41.iextra.1074

Generación de inclusiones no metálicas y su efecto sobre el bloquee de boquillas de colada continua en aceros ultra bajo carbono estabilizados con titanio

Translated title of the contribution: Generation of non-metallic inclusions and its effect on the nozzle clogging in continuous casting of ultra low carbon steels stabilized with Ti

O. Vega-Becerra, O. Reyes, F. Chávez-Alcalá, A. Romero-Serrano

Research output: Contribution to journal › Article › peer-review

Abstract

This work presents a thermodynamic and experimental analysis of the phases that precipitate in the non metallic inclusions depending on the contents of aluminium (Al), titanium (Ti) and oxygen (O) in the steel, and their influence on the nozzle clogging. For the thermodynamic analysis, the program FACT-WIN (Facility For The Analysis of Chemical Thermodynamics) subroutine Equilib. was used. The experimental tests were carried out in an TAMMANN furnace, in an argon atmosphere. The control of the content of dissolved oxygen was carried out by means of sensors of solid electrolyte bases zirconia. The characterization of the inclusions was carried out with SEM, EDS and by means of the technique of fractional reduction with carbon. A good agreement was observed between the thermodynamic predictions and the experimental results.

Translated title of the contribution	Generation of non-metallic inclusions and its effect on the nozzle clogging in continuous casting of ultra low carbon steels stabilized with Ti
Original language	Spanish
Pages (from-to)	447-451
Number of pages	5
Journal	Revista de Metalurgia (Madrid)
Volume	SPEC. VOL.
DOIs	https://doi.org/10.3989/revmetalm.2005.v41.iextra.1074
State	Published - 2005
Externally published	Yes

Access to Document

10.3989/revmetalm.2005.v41.iextra.1074

Cite this

@article{3dcf4996fe254ba68e15de4d7e09eee4,

title = "Generaci{\'o}n de inclusiones no met{\'a}licas y su efecto sobre el bloquee de boquillas de colada continua en aceros ultra bajo carbono estabilizados con titanio",

abstract = "This work presents a thermodynamic and experimental analysis of the phases that precipitate in the non metallic inclusions depending on the contents of aluminium (Al), titanium (Ti) and oxygen (O) in the steel, and their influence on the nozzle clogging. For the thermodynamic analysis, the program FACT-WIN (Facility For The Analysis of Chemical Thermodynamics) subroutine Equilib. was used. The experimental tests were carried out in an TAMMANN furnace, in an argon atmosphere. The control of the content of dissolved oxygen was carried out by means of sensors of solid electrolyte bases zirconia. The characterization of the inclusions was carried out with SEM, EDS and by means of the technique of fractional reduction with carbon. A good agreement was observed between the thermodynamic predictions and the experimental results.",

keywords = "Aluminium, Clogging, Deoxidation, Inclusions, Titanium",

author = "O. Vega-Becerra and O. Reyes and F. Ch{\'a}vez-Alcal{\'a} and A. Romero-Serrano",

year = "2005",

doi = "10.3989/revmetalm.2005.v41.iextra.1074",

language = "Espa{\~n}ol",

volume = "SPEC. VOL.",

pages = "447--451",

journal = "Revista de Metalurgia (Madrid)",

issn = "0034-8570",

}

TY - JOUR

T1 - Generación de inclusiones no metálicas y su efecto sobre el bloquee de boquillas de colada continua en aceros ultra bajo carbono estabilizados con titanio

AU - Vega-Becerra, O.

AU - Reyes, O.

AU - Chávez-Alcalá, F.

AU - Romero-Serrano, A.

PY - 2005

Y1 - 2005

N2 - This work presents a thermodynamic and experimental analysis of the phases that precipitate in the non metallic inclusions depending on the contents of aluminium (Al), titanium (Ti) and oxygen (O) in the steel, and their influence on the nozzle clogging. For the thermodynamic analysis, the program FACT-WIN (Facility For The Analysis of Chemical Thermodynamics) subroutine Equilib. was used. The experimental tests were carried out in an TAMMANN furnace, in an argon atmosphere. The control of the content of dissolved oxygen was carried out by means of sensors of solid electrolyte bases zirconia. The characterization of the inclusions was carried out with SEM, EDS and by means of the technique of fractional reduction with carbon. A good agreement was observed between the thermodynamic predictions and the experimental results.

AB - This work presents a thermodynamic and experimental analysis of the phases that precipitate in the non metallic inclusions depending on the contents of aluminium (Al), titanium (Ti) and oxygen (O) in the steel, and their influence on the nozzle clogging. For the thermodynamic analysis, the program FACT-WIN (Facility For The Analysis of Chemical Thermodynamics) subroutine Equilib. was used. The experimental tests were carried out in an TAMMANN furnace, in an argon atmosphere. The control of the content of dissolved oxygen was carried out by means of sensors of solid electrolyte bases zirconia. The characterization of the inclusions was carried out with SEM, EDS and by means of the technique of fractional reduction with carbon. A good agreement was observed between the thermodynamic predictions and the experimental results.

KW - Aluminium

KW - Clogging

KW - Deoxidation

KW - Inclusions

KW - Titanium

UR - http://www.scopus.com/inward/record.url?scp=33644636916&partnerID=8YFLogxK

U2 - 10.3989/revmetalm.2005.v41.iextra.1074

DO - 10.3989/revmetalm.2005.v41.iextra.1074

M3 - Artículo

AN - SCOPUS:33644636916

SN - 0034-8570

VL - SPEC. VOL.

SP - 447

EP - 451

JO - Revista de Metalurgia (Madrid)

JF - Revista de Metalurgia (Madrid)

ER -

Generación de inclusiones no metálicas y su efecto sobre el bloquee de boquillas de colada continua en aceros ultra bajo carbono estabilizados con titanio

Abstract

Access to Document

Other files and links

Fingerprint

Cite this