TY - GEN
T1 - Flow behavior in an experimental facility for airspeed metrology application
AU - Tolentino Eslava, R.
AU - Sánchez Silva, F.
AU - Tolentino Eslava, G.
AU - Toledo Velázquez, M.
PY - 2006
Y1 - 2006
N2 - An experimental characterization of flow behavior in an experimental facility for type S Pitot tube calibration by means of velocity profiles and turbulence is present. The measurements were carried out with a Pitot static tube and a hot wire anemometer at 4, 8 and 12 diameters from fan outlet for maximum velocities from 5.8 m/s to 35 m/s. The velocity and turbulence profiles were measurement at the discharge of the duct, in order to evaluate the possibility to use this installation for anemometer calibration too. Results showed that plane located at 12 D from fan outlet is adequate for establish the test section for type S Pitot tube calibration. Measurement in the exit of ducted outlet showed a good flow quality for anemometers calibration.
AB - An experimental characterization of flow behavior in an experimental facility for type S Pitot tube calibration by means of velocity profiles and turbulence is present. The measurements were carried out with a Pitot static tube and a hot wire anemometer at 4, 8 and 12 diameters from fan outlet for maximum velocities from 5.8 m/s to 35 m/s. The velocity and turbulence profiles were measurement at the discharge of the duct, in order to evaluate the possibility to use this installation for anemometer calibration too. Results showed that plane located at 12 D from fan outlet is adequate for establish the test section for type S Pitot tube calibration. Measurement in the exit of ducted outlet showed a good flow quality for anemometers calibration.
UR - http://www.scopus.com/inward/record.url?scp=33845744943&partnerID=8YFLogxK
M3 - Contribución a la conferencia
AN - SCOPUS:33845744943
SN - 0791837831
SN - 9780791837832
T3 - 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006
BT - 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006
T2 - 2006 2nd ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006
Y2 - 17 July 2006 through 20 July 2006
ER -