Er 3+-doped tellurite micro-structured fiber: Laser generation and optical gain

E. F. Chillcce; R. Narro-García; J. W. Menezes; E. Rodriguez; D. Marconi; H. L. Fragnito; L. C. Barbosa

doi:10.1117/12.909026

Er ³⁺-doped tellurite micro-structured fiber: Laser generation and optical gain

E. F. Chillcce, R. Narro-García, J. W. Menezes, E. Rodriguez, D. Marconi, H. L. Fragnito, L. C. Barbosa

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

Optical results concerning the generation of laser and optical gain by using an Er ³⁺-doped tellurite micro-structured fiber are reported for the first time. For this purpose a scheme that consist of two 980 nm diode pump lasers (simultaneously in the co-propagating and the counter-propagating directions) and short Er ³⁺-doped tellurite micro-structured fibers (fabricated by using the stack-and-draw technique and a soft glass drawing tower) was used. The laser produced here was obtained within the range 1530 to 1565 nm, and the maximum optical gain obtained was higher than 8 dB.

Original language	English
Title of host publication	Optical Components and Materials IX
DOIs	https://doi.org/10.1117/12.909026
State	Published - 2012
Externally published	Yes
Event	Optical Components and Materials IX - San Francisco, CA, United States Duration: 25 Jan 2012 → 26 Jan 2012

Publication series

Name	Proceedings of SPIE - The International Society for Optical Engineering
Volume	8257
ISSN (Print)	0277-786X

Conference

Conference	Optical Components and Materials IX
Country/Territory	United States
City	San Francisco, CA
Period	25/01/12 → 26/01/12

Keywords

Laser fibers
Microstructured tellurite fiber
Optical amplifiers

Access to Document

10.1117/12.909026

Cite this

Chillcce, E. F., Narro-García, R., Menezes, J. W., Rodriguez, E., Marconi, D., Fragnito, H. L., & Barbosa, L. C. (2012). Er ³⁺-doped tellurite micro-structured fiber: Laser generation and optical gain. In Optical Components and Materials IX Article 82570B (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 8257). https://doi.org/10.1117/12.909026

@inproceedings{b049672ff8644247adbe97311cb35389,

title = "Er 3+-doped tellurite micro-structured fiber: Laser generation and optical gain",

abstract = "Optical results concerning the generation of laser and optical gain by using an Er 3+-doped tellurite micro-structured fiber are reported for the first time. For this purpose a scheme that consist of two 980 nm diode pump lasers (simultaneously in the co-propagating and the counter-propagating directions) and short Er 3+-doped tellurite micro-structured fibers (fabricated by using the stack-and-draw technique and a soft glass drawing tower) was used. The laser produced here was obtained within the range 1530 to 1565 nm, and the maximum optical gain obtained was higher than 8 dB.",

keywords = "Laser fibers, Microstructured tellurite fiber, Optical amplifiers",

author = "Chillcce, {E. F.} and R. Narro-Garc{\'i}a and Menezes, {J. W.} and E. Rodriguez and D. Marconi and Fragnito, {H. L.} and Barbosa, {L. C.}",

year = "2012",

doi = "10.1117/12.909026",

language = "Ingl{\'e}s",

isbn = "9780819489005",

series = "Proceedings of SPIE - The International Society for Optical Engineering",

booktitle = "Optical Components and Materials IX",

note = "Optical Components and Materials IX ; Conference date: 25-01-2012 Through 26-01-2012",

}

Chillcce, EF, Narro-García, R, Menezes, JW, Rodriguez, E, Marconi, D, Fragnito, HL & Barbosa, LC 2012, Er ³⁺-doped tellurite micro-structured fiber: Laser generation and optical gain. in Optical Components and Materials IX., 82570B, Proceedings of SPIE - The International Society for Optical Engineering, vol. 8257, Optical Components and Materials IX, San Francisco, CA, United States, 25/01/12. https://doi.org/10.1117/12.909026

Er ³⁺-doped tellurite micro-structured fiber: Laser generation and optical gain. / Chillcce, E. F.; Narro-García, R.; Menezes, J. W. et al.
Optical Components and Materials IX. 2012. 82570B (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 8257).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Er 3+-doped tellurite micro-structured fiber

T2 - Optical Components and Materials IX

AU - Chillcce, E. F.

AU - Narro-García, R.

AU - Menezes, J. W.

AU - Rodriguez, E.

AU - Marconi, D.

AU - Fragnito, H. L.

AU - Barbosa, L. C.

PY - 2012

Y1 - 2012

N2 - Optical results concerning the generation of laser and optical gain by using an Er 3+-doped tellurite micro-structured fiber are reported for the first time. For this purpose a scheme that consist of two 980 nm diode pump lasers (simultaneously in the co-propagating and the counter-propagating directions) and short Er 3+-doped tellurite micro-structured fibers (fabricated by using the stack-and-draw technique and a soft glass drawing tower) was used. The laser produced here was obtained within the range 1530 to 1565 nm, and the maximum optical gain obtained was higher than 8 dB.

AB - Optical results concerning the generation of laser and optical gain by using an Er 3+-doped tellurite micro-structured fiber are reported for the first time. For this purpose a scheme that consist of two 980 nm diode pump lasers (simultaneously in the co-propagating and the counter-propagating directions) and short Er 3+-doped tellurite micro-structured fibers (fabricated by using the stack-and-draw technique and a soft glass drawing tower) was used. The laser produced here was obtained within the range 1530 to 1565 nm, and the maximum optical gain obtained was higher than 8 dB.

KW - Laser fibers

KW - Microstructured tellurite fiber

KW - Optical amplifiers

UR - http://www.scopus.com/inward/record.url?scp=84859996611&partnerID=8YFLogxK

U2 - 10.1117/12.909026

DO - 10.1117/12.909026

M3 - Contribución a la conferencia

AN - SCOPUS:84859996611

SN - 9780819489005

T3 - Proceedings of SPIE - The International Society for Optical Engineering

BT - Optical Components and Materials IX

Y2 - 25 January 2012 through 26 January 2012

ER -