Energy Considerations for Tracking in DC to DC Power Converters

G. Obregón-Pulido; G. Solís-Perales; J. A. Meda-Campaña; G. A. Vega-Gómez; E. Ruiz-Velázquez

doi:10.1155/2019/1098243

Energy Considerations for Tracking in DC to DC Power Converters

G. Obregón-Pulido, G. Solís-Perales, J. A. Meda-Campaña, G. A. Vega-Gómez, E. Ruiz-Velázquez

Escuela Superior de Ingeniería Mecánica y Eléctrica (ESIME), Unidad Zacatenco

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

A design of an adaptive controller applied to the boost and buck-boost converters to deal with the problem of tracking a sinusoidal voltage is proposed. The main contribution is to provide conditions on the design procedure in order to obtain a reduction in the DC voltage (offset of the sinusoidal signal) of the reference signal; in this way the AC energy is maximized. A nonlinear stable system is designed in order to produce the necessary inputs to exactly track the inductor reference current, which is a necessary condition to achieve the tracking behavior of the voltage reference signal f(t)=A+Bsin(wt). A numerical example is provided to corroborate the result.

Original language	English
Article number	1098243
Journal	Mathematical Problems in Engineering
Volume	2019
DOIs	https://doi.org/10.1155/2019/1098243
State	Published - 2019

Access to Document

10.1155/2019/1098243

Cite this

@article{f86a76555b22414c86079828c0a4c9f8,

title = "Energy Considerations for Tracking in DC to DC Power Converters",

abstract = "A design of an adaptive controller applied to the boost and buck-boost converters to deal with the problem of tracking a sinusoidal voltage is proposed. The main contribution is to provide conditions on the design procedure in order to obtain a reduction in the DC voltage (offset of the sinusoidal signal) of the reference signal; in this way the AC energy is maximized. A nonlinear stable system is designed in order to produce the necessary inputs to exactly track the inductor reference current, which is a necessary condition to achieve the tracking behavior of the voltage reference signal f(t)=A+Bsin(wt). A numerical example is provided to corroborate the result.",

author = "G. Obreg{\'o}n-Pulido and G. Sol{\'i}s-Perales and Meda-Campa{\~n}a, {J. A.} and Vega-G{\'o}mez, {G. A.} and E. Ruiz-Vel{\'a}zquez",

note = "Publisher Copyright: {\textcopyright} 2019 G. Obreg{\'o}n-Pulido et al.",

year = "2019",

doi = "10.1155/2019/1098243",

language = "Ingl{\'e}s",

volume = "2019",

journal = "Mathematical Problems in Engineering",

issn = "1024-123X",

}

TY - JOUR

T1 - Energy Considerations for Tracking in DC to DC Power Converters

AU - Obregón-Pulido, G.

AU - Solís-Perales, G.

AU - Meda-Campaña, J. A.

AU - Vega-Gómez, G. A.

AU - Ruiz-Velázquez, E.

PY - 2019

Y1 - 2019

N2 - A design of an adaptive controller applied to the boost and buck-boost converters to deal with the problem of tracking a sinusoidal voltage is proposed. The main contribution is to provide conditions on the design procedure in order to obtain a reduction in the DC voltage (offset of the sinusoidal signal) of the reference signal; in this way the AC energy is maximized. A nonlinear stable system is designed in order to produce the necessary inputs to exactly track the inductor reference current, which is a necessary condition to achieve the tracking behavior of the voltage reference signal f(t)=A+Bsin(wt). A numerical example is provided to corroborate the result.

AB - A design of an adaptive controller applied to the boost and buck-boost converters to deal with the problem of tracking a sinusoidal voltage is proposed. The main contribution is to provide conditions on the design procedure in order to obtain a reduction in the DC voltage (offset of the sinusoidal signal) of the reference signal; in this way the AC energy is maximized. A nonlinear stable system is designed in order to produce the necessary inputs to exactly track the inductor reference current, which is a necessary condition to achieve the tracking behavior of the voltage reference signal f(t)=A+Bsin(wt). A numerical example is provided to corroborate the result.

UR - http://www.scopus.com/inward/record.url?scp=85062365576&partnerID=8YFLogxK

U2 - 10.1155/2019/1098243

DO - 10.1155/2019/1098243

M3 - Artículo

AN - SCOPUS:85062365576

SN - 1024-123X

VL - 2019

JO - Mathematical Problems in Engineering

JF - Mathematical Problems in Engineering

M1 - 1098243

ER -

Energy Considerations for Tracking in DC to DC Power Converters

Abstract

Access to Document

Other files and links

Fingerprint

Cite this