Development of a fluorite/perovskite composite for the catalytic combustion of soot

M. A. de la Rosa-Guzmán; H. Romero-Mijangos; L. G. Cuéllar-Herrera; J. A. Fabián-Anguiano; B. H. Zeifert; H. A. Lara-García; J. Ortiz-Landeros; W. N. Téllez-Salazar

doi:10.1557/s43580-021-00190-2

Development of a fluorite/perovskite composite for the catalytic combustion of soot

M. A. de la Rosa-Guzmán, H. Romero-Mijangos, L. G. Cuéllar-Herrera, J. A. Fabián-Anguiano, B. H. Zeifert, H. A. Lara-García, J. Ortiz-Landeros, W. N. Téllez-Salazar

Research output: Contribution to journal › Article › peer-review

Abstract

The fluorite/perovskite composite with general formula Ce_0.9Pr_0.1O_2−δ/Pr_0.6Sr_0.4Fe_0.5Co_0.5O_3−δ was chemically synthesized by the citrate-EDTA method and subsequent calcination. First, the microstructural and textural properties of the ceramic powder were determined by several techniques such as XRD, N₂ physisorption, SEM, and TEM. Then the catalyst was loaded with Co as a promoter phase. Next, the catalytic evaluations were performed using thermogravimetric analysis to determine the combustion temperature of soot. Moreover, a series of cyclic analyses were carried out to evaluate the thermal stability of the catalyst. Based on the thermogravimetry data, the kinetic parameters of the catalytic soot combustion process were obtained. Graphical abstract: [Figure not available: see fulltext.]

Original language	English
Pages (from-to)	989-995
Number of pages	7
Journal	MRS Advances
Volume	6
Issue number	45
DOIs	https://doi.org/10.1557/s43580-021-00190-2
State	Published - Dec 2021
Externally published	Yes

Access to Document

10.1557/s43580-021-00190-2

Cite this

@article{761dd3b4819b4f38b992f8317efde5fc,

title = "Development of a fluorite/perovskite composite for the catalytic combustion of soot",

abstract = "The fluorite/perovskite composite with general formula Ce0.9Pr0.1O2−δ/Pr0.6Sr0.4Fe0.5Co0.5O3−δ was chemically synthesized by the citrate-EDTA method and subsequent calcination. First, the microstructural and textural properties of the ceramic powder were determined by several techniques such as XRD, N2 physisorption, SEM, and TEM. Then the catalyst was loaded with Co as a promoter phase. Next, the catalytic evaluations were performed using thermogravimetric analysis to determine the combustion temperature of soot. Moreover, a series of cyclic analyses were carried out to evaluate the thermal stability of the catalyst. Based on the thermogravimetry data, the kinetic parameters of the catalytic soot combustion process were obtained. Graphical abstract: [Figure not available: see fulltext.]",

author = "{de la Rosa-Guzm{\'a}n}, {M. A.} and H. Romero-Mijangos and Cu{\'e}llar-Herrera, {L. G.} and Fabi{\'a}n-Anguiano, {J. A.} and Zeifert, {B. H.} and Lara-Garc{\'i}a, {H. A.} and J. Ortiz-Landeros and T{\'e}llez-Salazar, {W. N.}",

note = "Publisher Copyright: {\textcopyright} 2021, The Author(s), under exclusive licence to The Materials Research Society.",

year = "2021",

month = dec,

doi = "10.1557/s43580-021-00190-2",

language = "Ingl{\'e}s",

volume = "6",

pages = "989--995",

journal = "MRS Advances",

issn = "2059-8521",

publisher = "Materials Research Society",

number = "45",

}

TY - JOUR

T1 - Development of a fluorite/perovskite composite for the catalytic combustion of soot

AU - de la Rosa-Guzmán, M. A.

AU - Romero-Mijangos, H.

AU - Cuéllar-Herrera, L. G.

AU - Fabián-Anguiano, J. A.

AU - Zeifert, B. H.

AU - Lara-García, H. A.

AU - Ortiz-Landeros, J.

AU - Téllez-Salazar, W. N.

PY - 2021/12

Y1 - 2021/12

N2 - The fluorite/perovskite composite with general formula Ce0.9Pr0.1O2−δ/Pr0.6Sr0.4Fe0.5Co0.5O3−δ was chemically synthesized by the citrate-EDTA method and subsequent calcination. First, the microstructural and textural properties of the ceramic powder were determined by several techniques such as XRD, N2 physisorption, SEM, and TEM. Then the catalyst was loaded with Co as a promoter phase. Next, the catalytic evaluations were performed using thermogravimetric analysis to determine the combustion temperature of soot. Moreover, a series of cyclic analyses were carried out to evaluate the thermal stability of the catalyst. Based on the thermogravimetry data, the kinetic parameters of the catalytic soot combustion process were obtained. Graphical abstract: [Figure not available: see fulltext.]

AB - The fluorite/perovskite composite with general formula Ce0.9Pr0.1O2−δ/Pr0.6Sr0.4Fe0.5Co0.5O3−δ was chemically synthesized by the citrate-EDTA method and subsequent calcination. First, the microstructural and textural properties of the ceramic powder were determined by several techniques such as XRD, N2 physisorption, SEM, and TEM. Then the catalyst was loaded with Co as a promoter phase. Next, the catalytic evaluations were performed using thermogravimetric analysis to determine the combustion temperature of soot. Moreover, a series of cyclic analyses were carried out to evaluate the thermal stability of the catalyst. Based on the thermogravimetry data, the kinetic parameters of the catalytic soot combustion process were obtained. Graphical abstract: [Figure not available: see fulltext.]

UR - http://www.scopus.com/inward/record.url?scp=85121342699&partnerID=8YFLogxK

U2 - 10.1557/s43580-021-00190-2

DO - 10.1557/s43580-021-00190-2

M3 - Artículo

AN - SCOPUS:85121342699

SN - 2059-8521

VL - 6

SP - 989

EP - 995

JO - MRS Advances

JF - MRS Advances

IS - 45

ER -

Development of a fluorite/perovskite composite for the catalytic combustion of soot

Abstract

Access to Document

Other files and links

Fingerprint

Cite this