If you made any changes in Pure, your changes will be visible here soon.

Research Output 1993 2019

2019

Analysis of the leakage-flow-induced vibration of a slip joint in a jet pump of a boiling water reactor

Cruz Castro, J., Hernández Palafox, E., Alarcón Sánchez, I. A., Hernández Gómez, L. H., Ruiz López, P. & Armenta Molina, A., 1 Jan 2019, In : Defect and Diffusion Forum. p. 23-31 19 p.

Research output: Contribution to journalArticleResearchpeer-review

jet pumps
boiling water reactors
Jet pumps
Boiling water reactors
slip

Lineal elastic fracture mechanics analysis applied for the evaluation of the structural integrity of a boiling water reactor vessel considering neutronic irradiation

Alvarez-Loya, I., López-Grijalba, Y., Carbajal-Figueroa, L. G., Hernández-Gómez, L. H., Ruiz-López, P. & Beltrán-Fernández, J. A., 1 Jan 2019, In : Defect and Diffusion Forum. p. 151-160 134 p.

Research output: Contribution to journalArticleResearchpeer-review

boiling water reactors
Boiling water reactors
fracture mechanics
Structural integrity
Fracture mechanics
2018

Ergonomic design of customized lower limb prostheses using artificial intelligence

Pava-Chipol, N. D., Hernández-Gómez, L. H., Beltrán-Fernández, J. A., Pava-Chipol, J. F., Moreno-Garibaldi, P., González-Rebattú, A., Raya-Romero, O. & Mcnaught-Salguero, C. H., 1 Jan 2018, In : Dyna (Spain). p. 20 1 p.

Research output: Contribution to journalNoteResearchpeer-review

Selection of low-cost biocompatible material for manufacturing customized maxillary prostheses

Moreno-Garibaldi, P., Beltrán Fernández, J. A., Hernández-Gómez, L. H., Pava-Chipol, N. D., Hernández-Palafox, E. & Corro-Valdez, N., 1 Jan 2018, In : Dyna (Spain). p. 18 1 p.

Research output: Contribution to journalNoteResearchpeer-review

2017
3 Citations (Scopus)

Acoustically-controlled optical Kerr effect signals in bimetallic Au-Pt nanoparticles embedded in a TiO<inf>2</inf> thin film

Navarro, A., Pava-Chipol, J., Martínez-González, C. L., Trejo-Valdez, M., Hernández-Gómez, L. H. & Torres-Torres, C., 1 Feb 2017, In : Optik. p. 24-31 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Nanocomposites
Nanoparticles
Optics and Photonics
Nanostructures
Polymethyl Methacrylate

Biomechanical analysis of damaged intervertebral disc using reflective photoelasticity

Rodríguez-Cañizo, R. G., Hernández-Gomez, L. H., Fuerte-Hernández, A., Merchán-Cruz, E. A., González-Rebatu, A. & Tamayo-Meza, P. A., 1 Apr 2017, In : Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia. p. 79-86 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Photoelasticity
Structural integrity
Mechanical properties
Fibers
3 Citations (Scopus)

Customization and numerical simulation of a cranial distractor using computed axial tomography (CAT)

Beltrán-Fernández, J. A., Martínez-Paredes, J., González-Rebattú, M., Hernández-Gómez, L. H. & Ruíz-Muñoz, O., 1 Jan 2017, Customization and numerical simulation of a cranial distractor using computed axial tomography (CAT). p. 371-398 331 p. (Advanced Structured Materials; vol. 33).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tomography
Computer simulation
Anthropometry
Patient treatment
Structural integrity

Design and development of a simplified wear simulator for total knee replacement (TKR) based on pin-disc machine

Rodríguez-Martínez, R., Urriolagoitia-Sosa, G., Miguel, C. T. S., Hernández-Gómez, L. H., Beltrán-Fernández, J. A. & Romero-Ángeles, B., 1 Jan 2017, Design and development of a simplified wear simulator for total knee replacement (TKR) based on pin-disc machine. p. 309-314 6 p. (Advanced Structured Materials; vol. 33).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Knee prostheses
Simulators
Wear of materials
Ultrahigh molecular weight polyethylenes
Polyethylene

Numerical evaluation of the structural integrity exhibited by a TiO<inf>2</inf> thin solid film doped with au

Fernández-Valdés, D., Hernández-Gómez, L. H., Trejo-Valdéz, M., Torres-Torres, C., Beltrán-Fernández, J. A., León-Lugo, N. M. & Urriolagoitia-Calderón, G., 1 Jan 2017, Numerical evaluation of the structural integrity exhibited by a TiO2 thin solid film doped with au. p. 429-440 384 p. (Advanced Structured Materials; vol. 33).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Structural integrity
Coatings
Hardness
Tissue
Thin films

Sliding mode control of a water-displacement based mechanism applied to the orientation of a parabolic-trough solar concentrator

Flores Campos, J. A., Perrusquía Guzmán, J. A., Beltrán Fernández, J. A. & Hernández Gómez, L. H., 1 Jan 2017, In : Defect and Diffusion Forum. p. 90-97 80 p.

Research output: Contribution to journalArticleResearchpeer-review

Solar concentrators
concentrators
Sliding mode control
troughs
sliding

Structural integrity analysis of a BWR core shroud with an irregular distribution of cracks: Limit load analysis

Ruiz-López, P., Hernández-Gómez, L. H., Urriolagoitia-Calderón, G., Serrano-Ramírez, M. L., Ocampo-Ramirez, A., Beltrán-Fernández, J. A. & Urriolagoitia-Sosa, G., 1 Jan 2017, Structural integrity analysis of a BWR core shroud with an irregular distribution of cracks: Limit load analysis. p. 413-427 370 p. (Advanced Structured Materials; vol. 33).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Structural integrity
Load limits
Cracks
Plastics
Welds
2 Citations (Scopus)

Thermal fatigue analysis in a high pressure cooling system (HPCS) nozzle of a boling water reactor

Hernández-Gómez, L. H., Pérez-Escobar, B. L., Beltrán-Fernández, J. A., Flores-Campos, J. A., Pérez-Montejo, S., Jiménez-Santiago, K. I., Ruíz-Lopez, P. & Urriolagoitia-Calderón, G. M., 1 Jan 2017, In : Defect and Diffusion Forum. p. 162-170 144 p.

Research output: Contribution to journalArticleResearchpeer-review

thermal fatigue
Thermal fatigue
cooling systems
Cooling systems
nozzles
2016

Biomechanical analysis of damaged intervertebral disc using reflective photoelasticity

Rodríguez-Cañizo, R. G., Hernández-Gomez, L. H., Fuerte-Hernández, A., Merchán-Cruz, E. A., González-Rebatu, A. & Tamayo-Meza, P. A., 1 Jan 2016, In : Revista Facultad de Ingenieria. p. 73-79 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Photoelasticity
Structural integrity
Mechanical properties
Fibers
10 Citations (Scopus)

Gyroscopic behavior exhibited by the optical Kerr effect in bimetallic Au–Pt nanoparticles suspended in ethanol

Fernández-Valdés, D., Torres-Torres, C., Martínez-González, C. L., Trejo-Valdez, M., Hernández-Gómez, L. H. & Torres-Martínez, R., 1 Jun 2016, In : Journal of Nanoparticle Research.

Research output: Contribution to journalArticleResearchpeer-review

Optical Kerr effect
Ethanol
Kerr effects
Nanoparticles
ethyl alcohol
2015
6 Citations (Scopus)

Bidirectional optical Kerr transmittance in a bilayer nanocomposite with Au nanoparticles and carbon nanotubes

Carrillo-Delgado, C., Torres-Torres, D., Trejo-Valdez, M., Rebollo, N. R., Hernández-Gómez, L. H. & Torres-Torres, C., 1 Aug 2015, In : Physica Scripta.

Research output: Contribution to journalArticleResearchpeer-review

Nanocomposites
Transmittance
Nanotubes
Nanoparticles
transmittance
4 Citations (Scopus)

Chemical and morphological characterization of Agave angustifolia bagasse fibers

Hidalgo-Reyes, M., Caballero-Caballero, M., HernáNdez-Gómez, L. H. & Urriolagoitia-Calderón, G., 1 Dec 2015, In : Botanical Sciences. p. 807-817 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Agave angustifolia
bagasse
tensile strength
lignin
scanning electron microscopy
1 Citation (Scopus)

Determination of the mechanical properties of lumbar porcine vertebrae with 2D digital image correlation

Campos-López, J. P., Fuerte-Hernández, A., Hernández-Gómez, L. H., Martínez-García, A., Beltrán-Fernández, J. A. & Urriolagoitia-Calderón, G., 1 Jan 2015, In : Journal of Applied Biomaterials and Functional Materials. p. e195-e200

Research output: Contribution to journalArticleResearchpeer-review

Lumbar Vertebrae
Elastic Modulus
Spine
Swine
Prosthesis Design
6 Citations (Scopus)

Lean production system model with Petri nets to support for decision making

Varela, A. M., Ramírez, J. A. R., Gómez, L. H. H., González, Á. M. & Reyes, M. Y. J., 1 Jan 2015, In : Ingeniare. p. 182-195 162 p.

Research output: Contribution to journalArticleResearchpeer-review

Petri nets
Decision making
Discrete event simulation
Waste disposal
Tires
2 Citations (Scopus)

Mechanical behavior on Cr base steels surface treatment

Doñu Ruiz, M. A., López Perrusquia, N., Urriolagoitia Sosa, G., Hernández Gómez, L. H. & Sánchez Huerta, D., 1 Jan 2015, p. 148-153. 132 p.

Research output: Contribution to conferencePaperResearch

Hard coatings
Steel
surface treatment
Surface treatment
steels

Modeling with Petri nets of the continuous improvement in production systems

Morales-Varela, A., Rojas-Ramírez, J., Hernández-Gómez, L. H., Morales-González, Á., Hernández-Simón, L. M. & Jiménez-Reyes, M. Y., 1 Jan 2015, In : Dyna (Spain). p. 19 1 p.

Research output: Contribution to journalNoteResearchpeer-review

2014
2 Citations (Scopus)

Evaluation of the structural integrity of the jet pumps of a boiling water reactor under hydrodynamic loading

Cuahquentzi, N. M., Gómez, L. H. H., López, P. R., Calderón, G. U., Fernández, J. A. B., Sosa, G. U., Cuamatzi, E. F., Ramírez, A. O. & Angeles, B. R., 2 Apr 2014, In : Defect and Diffusion Forum. p. 261-270 233 p.

Research output: Contribution to journalArticleResearchpeer-review

jet pumps
boiling water reactors
Jet pumps
Boiling water reactors
Structural integrity
11 Citations (Scopus)

Respiration rate and mechanical properties of peach fruit during storage at three maturity stages

Pérez-López, A., Chávez-Franco, S. H., Villaseñor-Perea, C. A., Espinosa-Solares, T., Hernández-Gómez, L. H. & Lobato-Calleros, C., 1 Jan 2014, In : Journal of Food Engineering. p. 111-117 99 p.

Research output: Contribution to journalArticleResearchpeer-review

Respiratory Rate
maturity stage
peaches
mechanical properties
Fruit
2013
6 Citations (Scopus)

Engineering the optical and mechanical properties exhibited by a titanium dioxide thin film with gold nanoparticles

Morales-Bonilla, S., Torres-Torres, C., Trejo-Valdez, M., Torres-Torres, D., Urriolagoitia-Sosa, G., Hernández-Gómez, L. H. & Urriolagoitia-Calderón, G., 1 Jan 2013, In : Optica Applicata. p. 651-661 584 p.

Research output: Contribution to journalArticleResearchpeer-review

Refractometry
titanium oxides
Gold
Nanoparticles
Titanium dioxide
1 Citation (Scopus)
Residual stresses
Welding
Cracks
Computer simulation
Electric arc welding
1 Citation (Scopus)

On the numerical analysis of contact stresses in a total knee replacement (TKR)

Rodríguez-Martínez, R., Urriolagoitia-Sosa, G., Torres-San Miguel, C. R., Hernández-Gómez, L. H., Martínez-Sánchez, I. & Urriolagoitia-Calderón, G., 1 Dec 2013, p. 197-201. 176 p.

Research output: Contribution to conferencePaperResearch

Knee prostheses
Ultrahigh molecular weight polyethylenes
Polyethylenes
Numerical analysis
Wear of materials
13 Citations (Scopus)

Three dimensional finite element model of soil compaction caused by agricultural tire traffic

González Cueto, O., Iglesias Coronel, C. E., Recarey Morfa, C. A., Urriolagoitia Sosa, G., Hernández Gómez, L. H., Urriolagoitia Calderón, G. & Herrera Suárez, M., 1 Jan 2013, In : Computers and Electronics in Agriculture. p. 146-152 130 p.

Research output: Contribution to journalArticleResearchpeer-review

tires
tire
soil compaction
Tires
traffic
2012

Design and evaluation of a water solar heater fabricated by PVC pipe in spiral

Catya, Z. A., Guillermo, U. S., Guillermo, U. C., Héctor, H. G. L. & David, T. F., 11 Oct 2012, In : Acta Cientifica Venezolana. p. 19-29 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Solar water heaters
heaters
pipes
Polyvinyl Chloride
pipe
13 Citations (Scopus)

High resolution non-destructive evaluation of defects using artificial neural networks and wavelets

Farley, S. J., Durodola, J. F., Fellows, N. A. & Hernández-Gómez, L. H., 1 Nov 2012, In : NDT and E International. p. 69-75 61 p.

Research output: Contribution to journalArticleResearchpeer-review

Wavelet Analysis
Ultrasonics
Neural networks
Defects
evaluation
1 Citation (Scopus)
Powders
Fabrication
Hammers
Conceptual design
Numerical analysis
Stainless Steel
Stainless steel
Conformations
Steel
Hardness
3 Citations (Scopus)
Platinum
Nanoparticles
platinum
Thin films
nanoparticles
1 Citation (Scopus)

Using fracture mechanics for determining residual stress fields in diverse geometries

Urriolagiotia-Sosa, G., Urriolagiotia-Calderón, G., Romero-Ángeles, B., Torres-Franco, D., Hernández-Gómez, L. H., Molina-Ballinas, A., Torres-San Miguel, C. R. & Campos-López, J. P., 1 Jan 2012, In : Ingenieria e Investigacion. p. 19-26 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanics
Fracture mechanics
Residual stresses
Cracks
Geometry
2011
4 Citations (Scopus)

Biomechanical characterization of a cervical corporectomy using porcine specimens, following an experimental approach

Hernández-Gómez, L. H., Beltrán-Fernández, J. A., Urriolagoitia-Calderón, G., González-Rebatú, A., Galán Vera, M. M. & Urriolagoitia Sosa, G., 2 May 2011, Biomechanical characterization of a cervical corporectomy using porcine specimens, following an experimental approach. p. 103-111 91 p. (Key Engineering Materials; vol. 478).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

vertebrae
Grafts
Bone
Structural integrity
bones

Comparative experimental analysis of different bending methods for the mechanical characterization of materials with previous loading history (stress-strain curves)

Torres-Franco, D., Urriolagoitia-Sosa, G., Urriolagoitia-Calderón, G., Hernández-Gómez, L. H., Romero-Ángeles, B. & Cedeño-Verduzco, V. F., 26 Sep 2011, Comparative experimental analysis of different bending methods for the mechanical characterization of materials with previous loading history (stress-strain curves). p. 1377-1382 1238 p. (Advanced Materials Research; vol. 314-316).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

History
Aluminum
Publications
Research Personnel
Research
5 Citations (Scopus)
unloading
Residual Stress
Experimental Analysis
Unloading
Compliance

Determination of residual stresses originated in a die process using the Crack Compliance Method

Molina-Ballinas, A., Urriolagoitia-Sosa, G., Urriolagoitia-Calderón, G., Hernández-Gómez, L. H., Verduzco-Cedeño, V. F., Torres-Franco, D., Torres-San Miguel, C. R. & Romero-Ángeles, B., 14 Nov 2011, p. 2572-2576. 2314 p.

Research output: Contribution to conferencePaperResearch

Residual stresses
Cracks
Nucleation
Steel
Compliance

Evaluation of the integrity of a human molar under compressive loading using 3-D Axial Tomography

Beltrán-Fernández, J. A., Espinal Gutiérrez, Y., Hernández-Gómez, L. H., Urriolagoitia-Calderón, G., Gómez-Medina, D., Espinal-Gutiérrez, B., Urriolagoitia-Sosa, G. & Rodríguez-Escalante, E., 26 Oct 2011, Evaluation of the integrity of a human molar under compressive loading using 3-D Axial Tomography. p. 267-272 239 p. (Applied Mechanics and Materials; vol. 70).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tomography
Photoelasticity
Structural integrity
Stress concentration
Loads (forces)
2 Citations (Scopus)

GA based synthesis of mechanisms for lower limb prosthetic applications

Merchán-Cruz, E. A., Lugo-González, E., Ramírez-Gordillo, J., Rodríguez-Cañizo, R. G., Sandoval-Pineda, J. & Hernández-Gómez, L. H., 8 Apr 2011, In : RIAI - Revista Iberoamericana de Automatica e Informatica Industrial. p. 45-51 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Prosthetics
Genetic algorithms
Trajectories
1 Citation (Scopus)

Hydrogen fuel cell design and manufacturing process used for public transportation in Mexico City

Luna-Sandoval, G., Urriolagoitia-C., G., Hernández, L. H., Urriolagoitia-S., G. & Jiménez, E., 14 Nov 2011, p. 2009-2014. 1807 p.

Research output: Contribution to conferencePaperResearch

Hydrogen fuels
Fuel cells
Environmental technology
Global warming
Proton exchange membrane fuel cells (PEMFC)
4 Citations (Scopus)
Mechanical properties
Mechanics
Strain hardening
Compliance
Residual stresses

Pure bending determination of stress-strain curves for an Aluminum alloy

Torres-Franco, D., Urriolagoitia-Sosa, G., Urriolagoitia-Calderón, G., Hernández-Gómez, L. H., Molina-Ballinas, A., Torres-Torres, C. & Romero-Ángeles, B., 14 Nov 2011, p. 2279-2283. 2050 p.

Research output: Contribution to conferencePaperResearch

Stress-strain curves
Aluminum alloys
Testing
Bending moments
Compressive stress
1 Citation (Scopus)
Residual stresses
Cracks
Strain gages
Strain hardening
Fracture mechanics
1 Citation (Scopus)

Residual stress interaction against mechanical loading during the manufacturing process of an assault rifle component

Urriolagoitia-Sosa, G., Molina-Ballinas, A., Verduzco-Cedeño, V. F., Romero-Angeles, B., Urriolagoitia-Calderön, G., Hernández-Gömez, L. H. & Y Beltrán-Fernández, J. A., 26 Oct 2011, Residual stress interaction against mechanical loading during the manufacturing process of an assault rifle component. p. 482-487 433 p. (Applied Mechanics and Materials; vol. 70).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Residual stresses
Microstructure
Punching
Steel
Structural analysis
2010
9 Citations (Scopus)

Biomechanics and numerical evaluation of cervical porcine models considering compressive loads using 2-D classic computer tomography CT, 3-D scanner and 3-D computed tomography

Beltran-Fernández, J. A., Hernández-Gómez, L. H., Urriolagoitia-Calderón, G., González-Rebatú, A. & Urriolagoitia-Sosa, G., 1 Dec 2010, Biomechanics and numerical evaluation of cervical porcine models considering compressive loads using 2-D classic computer tomography CT, 3-D scanner and 3-D computed tomography. p. 287-295 257 p. (Applied Mechanics and Materials; vol. 24-25).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Biomechanics
Tomography
Titanium alloys
Grafts
Bone
2 Citations (Scopus)
Stainless Steel
Biocompatible Materials
History
Research
2 Citations (Scopus)

Evaluation of the impact of residual stresses in crack initiation with the application of the crack compliance method part I, numerical analysis

Urriolagoitia-Sosa, G., Romero-Ángeles, B., Hernández-Gómez, L. H., Urriolagoitia-Calderón, G., Beltrán-Fernández, J. A. & Torres-Torres, C., 1 Dec 2010, Evaluation of the impact of residual stresses in crack initiation with the application of the crack compliance method part I, numerical analysis. p. 253-259 227 p. (Applied Mechanics and Materials; vol. 24-25).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Crack initiation
Numerical analysis
Residual stresses
Cracks
Computer simulation
1 Citation (Scopus)

Evaluation of the impact of residual stresses in crack initiation with the application of the crack compliance method part II, experimental analysis

Urriolagoitia-Sosa, G., Romero-Ángeles, B., Hernández-Gómez, L. H., Urriolagoitia-Calderón, G., Beltrán-Fernández, J. A. & Torres-Torres, C., 1 Dec 2010, Evaluation of the impact of residual stresses in crack initiation with the application of the crack compliance method part II, experimental analysis. p. 261-266 234 p. (Applied Mechanics and Materials; vol. 24-25).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Crack initiation
Residual stresses
Cracks
Biomaterials
Compliance
1 Citation (Scopus)

Performance optimization of GA based planar mechanism synthesis

Lugo-González, E., Hernández-Gómez, L. H., Ponce-Reynoso, R., Velázquez-Sánchez, A. T. G., Merchán-Cruz, E. A. & Ramírez-Gordillo, J., 1 Dec 2010, p. 126-131. 112 p.

Research output: Contribution to conferencePaperResearch

Genetic algorithms
Trajectories
2009
4 Citations (Scopus)
Program Evaluation
Structural integrity
Mechanics
Fracture mechanics
Plastics