Solutions for stability and astigmatism in high power laser resonators

R. Narro, M. Arronte, E. De Posada, L. Ponce, E. Rodríguez

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

1 Cita (Scopus)

Resumen

A method is proposed for the design of fundamental mode high power resonators, with joined stability zones. A parameter is created which gives the minimum length a laser resonator should have while having at the same time the broadest stabilities zones. For multimode and large mode volume resonators, a configuration is introduced for maximizing the laser overall efficiency due to the compensation of the astigmatism induced by the flash lamp pumping heating. The later configuration proposes a dual-active medium resonator, with 90 degree rotation around the optical axis between the astigmatic thermal lenses of the mediums. The reliability of this configuration is corroborated experimentally using a Nd:YAG dual-active medium resonator. It is found that in the pumping power range where the astigmatism compensation is possible, the overall efficiency is constant, even when increasing the excitation power with the consequent increase of the thermal lens dioptric power.

Idioma originalInglés
Título de la publicación alojadaSeventh Symposium Optics in Industry
DOI
EstadoPublicada - 2009
Publicado de forma externa
Evento7th Symposium Optics in Industry, VII SOI - Guadalajara, Jalisco, México
Duración: 11 sep. 200912 sep. 2009

Serie de la publicación

NombreProceedings of SPIE - The International Society for Optical Engineering
Volumen7499
ISSN (versión impresa)0277-786X

Conferencia

Conferencia7th Symposium Optics in Industry, VII SOI
País/TerritorioMéxico
CiudadGuadalajara, Jalisco
Período11/09/0912/09/09

Huella

Profundice en los temas de investigación de 'Solutions for stability and astigmatism in high power laser resonators'. En conjunto forman una huella única.

Citar esto