Responsivity determination of a hydrogenated amorphous silicon micro-bolometer array

A. Orduña-Díaz, M. Rojas-López, R. Delgado-Macuil, Alfonso Torres-Jácome, F. J. De La Hidalga-Wade, Daniel Ferrusca, Salvador Ventura-Gonzalez, C. G. Treviño-Palacios

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

1 Cita (Scopus)

Resumen

We present the characterization of a boron doped hydrogenated amorphous silicon (a-Si:H) thermosensor bolometer array for far infrared detection. The array was fabricated over a silicon wafer on a 0.4 μm silicon-nitride (Si 3N 4) layer. Wet bulk micromachining was used to create pixels of suspended nitride film by removing the silicon underneath. On this film, a boron doped a-Si:H layer was deposited using a low frequency PECVD system at 540 K. Conventional lithography was used to define the bolometers on the nitride windows, and the 5 × 5 microbolometer array was fabricated and characterized at 77 K. A 1.17 x 10 -2 mA/W responsivity, with a temperature coefficient of resistance (TCR) of 4.25%, were obtained.

Idioma originalInglés
Título de la publicación alojada22nd Congress of the International Commission for Optics
Subtítulo de la publicación alojadaLight for the Development of the World
DOI
EstadoPublicada - 2011
Evento22nd Congress of the International Commission for Optics: Light for the Development of the World - Puebla, México
Duración: 15 ago. 201119 ago. 2011

Serie de la publicación

NombreProceedings of SPIE - The International Society for Optical Engineering
Volumen8011
ISSN (versión impresa)0277-786X

Conferencia

Conferencia22nd Congress of the International Commission for Optics: Light for the Development of the World
País/TerritorioMéxico
CiudadPuebla
Período15/08/1119/08/11

Huella

Profundice en los temas de investigación de 'Responsivity determination of a hydrogenated amorphous silicon micro-bolometer array'. En conjunto forman una huella única.

Citar esto