Fracture indentation on AISI 1018 borided steels

I. Campos-Silva, M. Ortiz-Domínguez, E. Hernández-Sánchez, D. Bravo-Bárcenas, O. Bravo-Bárcenas, M. A. Doñu-Ruíz, J. Martínez-Trinidad, J. A. Jiménez-Bernal, Y. Domínguez-Galicia

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

1 Cita (Scopus)

Resumen

Fracture indentation was applied to estimate the fracture toughness of AISI 1018 borided steels. The Fe2B hard layers were formed using the powder-pack boriding process for two temperatures with 4 and 8 h of exposure times. The fracture toughness of the iron boride layer of the AISI 1018 borided steels was estimated using a Vickers microindentation induced-fracture testing at distances of 15 and 30 μm from the surface, applying four loads (0.49, 0.98, 1.96 and 2.9 N). The microcracks generated at the corners of the Vickers microindentation were considered as experimental parameters, which are introduced in a Palmqvist crack model to determine their corresponding fracture toughness KC. As a result, the experimental parameters, such as exposure time and boriding temperature are compared with the resulting fracture toughness of the borided phase.

Idioma originalInglés
Título de la publicación alojadaFracture Mechanics
EditorialTrans Tech Publications Ltd
Páginas87-95
Número de páginas9
ISBN (versión impresa)9780878492534
DOI
EstadoPublicada - 2010

Serie de la publicación

NombreKey Engineering Materials
Volumen449
ISSN (versión impresa)1013-9826
ISSN (versión digital)1662-9795

Huella

Profundice en los temas de investigación de 'Fracture indentation on AISI 1018 borided steels'. En conjunto forman una huella única.

Citar esto