TY - GEN
T1 - Data Acquisition System for Solar Panel Analysis
AU - De la Rosa, Hernán
AU - Mondragón, Margarita
AU - Salmerón-Quiroz, Bernardino Benito
N1 - Publisher Copyright:
© 2019, Springer Nature Switzerland AG.
PY - 2019
Y1 - 2019
N2 - This project introduces a data acquisition system for solar panel technologies, mainly for analysis and report purposes. The measured variables are the current and voltage generated by the panel so that the power and voltage curve can be plotted to analyze. The system is made up of two parts, the hardware that will be designed using an Arduino circuit board with a voltage sensor, a current sensor and a temperature sensor that feedback the modeled circuit based on Matlab and Simscape platforms. As an addition to the hardware system, an embedded system is designed using operational amplifiers to simulate a solar panel, this emulation is based on the mathematical model that gives our values for variables generated by solar technologies. For simulation of the modeling and plotting of the generated data, we propose the use of Wahba’s method, for smoothing noisy data using spline function. This model will serve as a research/experimentation tool for technologies that improve the efficiency range of a solar cell.
AB - This project introduces a data acquisition system for solar panel technologies, mainly for analysis and report purposes. The measured variables are the current and voltage generated by the panel so that the power and voltage curve can be plotted to analyze. The system is made up of two parts, the hardware that will be designed using an Arduino circuit board with a voltage sensor, a current sensor and a temperature sensor that feedback the modeled circuit based on Matlab and Simscape platforms. As an addition to the hardware system, an embedded system is designed using operational amplifiers to simulate a solar panel, this emulation is based on the mathematical model that gives our values for variables generated by solar technologies. For simulation of the modeling and plotting of the generated data, we propose the use of Wahba’s method, for smoothing noisy data using spline function. This model will serve as a research/experimentation tool for technologies that improve the efficiency range of a solar cell.
KW - Autoregressive model
KW - DATA network
KW - Embedded system
KW - Matlab/Simscape
KW - Solar energy
KW - Validation parameters
KW - Wahba’s problem
UR - http://www.scopus.com/inward/record.url?scp=85076156195&partnerID=8YFLogxK
U2 - 10.1007/978-3-030-33229-7_4
DO - 10.1007/978-3-030-33229-7_4
M3 - Contribución a la conferencia
SN - 9783030332280
T3 - Communications in Computer and Information Science
SP - 34
EP - 44
BT - Telematics and Computing - 8th International Congress, WITCOM 2019, Proceedings
A2 - Mata-Rivera, Miguel Felix
A2 - Zagal-Flores, Roberto
A2 - Barría-Huidobro, Cristian
PB - Springer
T2 - 8th International Congress on Telematics and Computing, WITCOM 2019
Y2 - 4 November 2019 through 8 November 2019
ER -