Control of active injector for multi-pulse rectifiers operating on variable frequency supplies

Ismael Araujo-Vargas, Andrew J. Forsyth, F. Javier Chivite-Zabalza

Resultado de la investigación: Contribución a una conferenciaArtículo

3 Citas (Scopus)

Resumen

A control strategy is described to drive an active injector for multi-pulse rectifiers operating on variable frequency aerospace supplies. The injection technique utilises a single low-rated active device that carries approximately 2.9% of the load current, and this may be driven with either low-frequency pulses or high-frequency, pulse-width modulation to produce 24-pulse operation or multi-level PWM operation respectively. The resultant input currents are almost sinusoidal, the line current THD being 2.36% for the 24-pulse operation and 1.06% for the PWM operation. The control principle, design and performance are presented in this paper. Experimental results of the controller with a 4 kW prototype are shown. © 2007 IEEE.
Idioma originalInglés estadounidense
Páginas583-590
Número de páginas523
DOI
EstadoPublicada - 1 dic 2007
EventoProceedings of the International Conference on Power Electronics and Drive Systems -
Duración: 1 dic 2007 → …

Conferencia

ConferenciaProceedings of the International Conference on Power Electronics and Drive Systems
Período1/12/07 → …

Huella Profundice en los temas de investigación de 'Control of active injector for multi-pulse rectifiers operating on variable frequency supplies'. En conjunto forman una huella única.

  • Citar esto

    Araujo-Vargas, I., Forsyth, A. J., & Chivite-Zabalza, F. J. (2007). Control of active injector for multi-pulse rectifiers operating on variable frequency supplies. 583-590. Papel presentado en Proceedings of the International Conference on Power Electronics and Drive Systems, . https://doi.org/10.1109/PEDS.2007.4487760