Alteration of lubricity of Jatropha oil used as bio-lubricant for engines due to thermal ageing

Leonardo Israel Farfan-Cabrera, Ezequiel Alberto Gallardo-Hernández, Mario Gómez-Guarneros, José Pérez-González, Jesús Gilberto Godínez-Salcedo

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

27 Citas (Scopus)

Resumen

This work aims to determine the alteration of lubricity properties of Jatropha oil (SJO) due to thermal ageing caused by approached long-term use conditions as lubricant in engines. SJO, a mineral engine oil (EMO) and a blend made of 80%vol. of EMO and 20%vol. of SJO (B20) were tested. The oils were thermally aged at 160 °C for 30 and 60h. Oil ageing was characterized by measurement of oxidation, depletion of additives, kinematic viscosity and viscosity index. Ball-on-disk tests were conducted to evaluate friction coefficients and wear rates of disks samples from engine cylinder liners by using the oils. SJO was seriously oxidized compared to EMO and B20 by ageing, exhibiting high changes of viscosity from 58.8 to 1970 cSt at 26 °C and decrease of viscosity index from 262 to 200.4. The friction coefficients of SJO were not altered remaining in low values 0.06–0.07. The viscosity increase allowed a reduction of wear rates from 0.00065 to 0.0002 mm3/m. B20 exhibited better lubricity properties than EMO; and they even were improved after ageing. Thus, SJO could be blended with mineral oils in low concentrations to reduce friction and wear while promoting safe use of a renewable product in short and long-term uses in engines.

Idioma originalInglés
Páginas (desde-hasta)1197-1204
Número de páginas8
PublicaciónRenewable Energy
Volumen149
DOI
EstadoPublicada - abr. 2020

Huella

Profundice en los temas de investigación de 'Alteration of lubricity of Jatropha oil used as bio-lubricant for engines due to thermal ageing'. En conjunto forman una huella única.

Citar esto