Wideband microstrip antenna design for 3G and LTE (4G) mobile phones

Ricardo Meneses Gonzalez; Roberto Linares; Laura Montes Peralta

doi:10.1109/ROPEC.2018.8661418

Wideband microstrip antenna design for 3G and LTE (4G) mobile phones

Ricardo Meneses Gonzalez, Roberto Linares, Laura Montes Peralta

Escuela Superior de Ingeniería Mecánica y Eléctrica (ESIME), Unidad Zacatenco

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

This work proposes a wideband planar microstrip antenna for 3G, LTE and Wi-Fi Bands, describing the simulation, design implementation and measurement. Actually the minaturization of microstrip antennas is an important challenge of radio engineering. The objective is reduce dimensions, weight and cost, in order to meet the miniaturization requirements of portable communication equipment and be installed inside of it. This kind of antenna is sufficiently small to be used on radio mobile devices, which satisfies gain, resonance frequency, impedance and low cost. It covers 1.7 - 2.4 GHz frequency band, which it is assigned to particularly wireless mobile communication services.

Original language	English
Title of host publication	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781538659359
DOIs	https://doi.org/10.1109/ROPEC.2018.8661418
State	Published - 2 Jul 2018
Event	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018 - Ixtapa, Guerrero, Mexico Duration: 14 Nov 2018 → 16 Nov 2018

Publication series

Name	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

Conference

Conference	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018
Country/Territory	Mexico
City	Ixtapa, Guerrero
Period	14/11/18 → 16/11/18

Keywords

3G Band
LTE Band
Microstrip antenna
Resonance frequency

Access to Document

10.1109/ROPEC.2018.8661418

Cite this

Gonzalez, R. M., Linares, R., & Peralta, L. M. (2018). Wideband microstrip antenna design for 3G and LTE (4G) mobile phones. In 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018 Article 8661418 (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ROPEC.2018.8661418

Gonzalez, Ricardo Meneses ; Linares, Roberto ; Peralta, Laura Montes. / Wideband microstrip antenna design for 3G and LTE (4G) mobile phones. 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018).

@inproceedings{8c7d4c2cb36a47b08ce16da21d87efde,

title = "Wideband microstrip antenna design for 3G and LTE (4G) mobile phones",

abstract = "This work proposes a wideband planar microstrip antenna for 3G, LTE and Wi-Fi Bands, describing the simulation, design implementation and measurement. Actually the minaturization of microstrip antennas is an important challenge of radio engineering. The objective is reduce dimensions, weight and cost, in order to meet the miniaturization requirements of portable communication equipment and be installed inside of it. This kind of antenna is sufficiently small to be used on radio mobile devices, which satisfies gain, resonance frequency, impedance and low cost. It covers 1.7 - 2.4 GHz frequency band, which it is assigned to particularly wireless mobile communication services.",

keywords = "3G Band, LTE Band, Microstrip antenna, Resonance frequency",

author = "Gonzalez, {Ricardo Meneses} and Roberto Linares and Peralta, {Laura Montes}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018 ; Conference date: 14-11-2018 Through 16-11-2018",

year = "2018",

month = jul,

day = "2",

doi = "10.1109/ROPEC.2018.8661418",

language = "Ingl{\'e}s",

series = "2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018",

address = "Estados Unidos",

}

Gonzalez, RM, Linares, R & Peralta, LM 2018, Wideband microstrip antenna design for 3G and LTE (4G) mobile phones. in 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018., 8661418, 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018, Institute of Electrical and Electronics Engineers Inc., 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018, Ixtapa, Guerrero, Mexico, 14/11/18. https://doi.org/10.1109/ROPEC.2018.8661418

Wideband microstrip antenna design for 3G and LTE (4G) mobile phones. / Gonzalez, Ricardo Meneses; Linares, Roberto; Peralta, Laura Montes.
2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. 8661418 (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Wideband microstrip antenna design for 3G and LTE (4G) mobile phones

AU - Gonzalez, Ricardo Meneses

AU - Linares, Roberto

AU - Peralta, Laura Montes

PY - 2018/7/2

Y1 - 2018/7/2

N2 - This work proposes a wideband planar microstrip antenna for 3G, LTE and Wi-Fi Bands, describing the simulation, design implementation and measurement. Actually the minaturization of microstrip antennas is an important challenge of radio engineering. The objective is reduce dimensions, weight and cost, in order to meet the miniaturization requirements of portable communication equipment and be installed inside of it. This kind of antenna is sufficiently small to be used on radio mobile devices, which satisfies gain, resonance frequency, impedance and low cost. It covers 1.7 - 2.4 GHz frequency band, which it is assigned to particularly wireless mobile communication services.

AB - This work proposes a wideband planar microstrip antenna for 3G, LTE and Wi-Fi Bands, describing the simulation, design implementation and measurement. Actually the minaturization of microstrip antennas is an important challenge of radio engineering. The objective is reduce dimensions, weight and cost, in order to meet the miniaturization requirements of portable communication equipment and be installed inside of it. This kind of antenna is sufficiently small to be used on radio mobile devices, which satisfies gain, resonance frequency, impedance and low cost. It covers 1.7 - 2.4 GHz frequency band, which it is assigned to particularly wireless mobile communication services.

KW - 3G Band

KW - LTE Band

KW - Microstrip antenna

KW - Resonance frequency

UR - http://www.scopus.com/inward/record.url?scp=85063869330&partnerID=8YFLogxK

U2 - 10.1109/ROPEC.2018.8661418

DO - 10.1109/ROPEC.2018.8661418

M3 - Contribución a la conferencia

AN - SCOPUS:85063869330

T3 - 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

BT - 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

Y2 - 14 November 2018 through 16 November 2018

ER -

Gonzalez RM, Linares R, Peralta LM. Wideband microstrip antenna design for 3G and LTE (4G) mobile phones. In 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018. Institute of Electrical and Electronics Engineers Inc. 2018. 8661418. (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018). doi: 10.1109/ROPEC.2018.8661418

Wideband microstrip antenna design for 3G and LTE (4G) mobile phones

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this