Synthesis and characterisation of YSZ-Al 2O 3 nanostructured materials

J. Santoyo-Salazar; G. González; P. S. Schabes-Retchkiman; J. A. Ascencio; J. Tartaj-Salvador; J. A. Chávez-Carvayar

doi:10.1166/jnn.2006.334

Synthesis and characterisation of YSZ-Al ₂O ₃ nanostructured materials

J. Santoyo-Salazar, G. González, P. S. Schabes-Retchkiman, J. A. Ascencio, J. Tartaj-Salvador, J. A. Chávez-Carvayar

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

In this work a co-precipitation route was used to synthesise two yttria-stabilised-zirconia (YSZ) phases with different concentrations of alumina (Al ₂O ₃). A tetragonal, with 3 mol% yttria, and a cubic, with 8 mol% yttria, phases were added with alumina in different weight proportions, 90/10, 80/20, 70/30, and 60/40, respectively. After synthesised, products were sintered in a range 800-1100 °C for different intervals of time. Compounds were characterised by X-ray diffraction, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Rietveld refinements, using FULPROF-Suite software, were carried out to obtain the cell parameters and structural characterisation of products.

Original language	English
Pages (from-to)	2103-2109
Number of pages	7
Journal	Journal of Nanoscience and Nanotechnology
Volume	6
Issue number	7
DOIs	https://doi.org/10.1166/jnn.2006.334
State	Published - Jul 2006
Externally published	Yes

Keywords

Co-Precipitation
High Resolution Microscopy
Nanocompound
Rietveld Refinement
Yttria-Stabilised-Zirconia

Access to Document

10.1166/jnn.2006.334

Cite this

@article{67e8ee5dac864970b20ef3603e7418c5,

title = "Synthesis and characterisation of YSZ-Al 2O 3 nanostructured materials",

abstract = "In this work a co-precipitation route was used to synthesise two yttria-stabilised-zirconia (YSZ) phases with different concentrations of alumina (Al 2O 3). A tetragonal, with 3 mol% yttria, and a cubic, with 8 mol% yttria, phases were added with alumina in different weight proportions, 90/10, 80/20, 70/30, and 60/40, respectively. After synthesised, products were sintered in a range 800-1100 °C for different intervals of time. Compounds were characterised by X-ray diffraction, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Rietveld refinements, using FULPROF-Suite software, were carried out to obtain the cell parameters and structural characterisation of products.",

keywords = "Co-Precipitation, High Resolution Microscopy, Nanocompound, Rietveld Refinement, Yttria-Stabilised-Zirconia",

author = "J. Santoyo-Salazar and G. Gonz{\'a}lez and Schabes-Retchkiman, {P. S.} and Ascencio, {J. A.} and J. Tartaj-Salvador and Ch{\'a}vez-Carvayar, {J. A.}",

year = "2006",

month = jul,

doi = "10.1166/jnn.2006.334",

language = "Ingl{\'e}s",

volume = "6",

pages = "2103--2109",

journal = "Journal of Nanoscience and Nanotechnology",

issn = "1533-4880",

number = "7",

}

TY - JOUR

T1 - Synthesis and characterisation of YSZ-Al 2O 3 nanostructured materials

AU - Santoyo-Salazar, J.

AU - González, G.

AU - Schabes-Retchkiman, P. S.

AU - Ascencio, J. A.

AU - Tartaj-Salvador, J.

AU - Chávez-Carvayar, J. A.

PY - 2006/7

Y1 - 2006/7

N2 - In this work a co-precipitation route was used to synthesise two yttria-stabilised-zirconia (YSZ) phases with different concentrations of alumina (Al 2O 3). A tetragonal, with 3 mol% yttria, and a cubic, with 8 mol% yttria, phases were added with alumina in different weight proportions, 90/10, 80/20, 70/30, and 60/40, respectively. After synthesised, products were sintered in a range 800-1100 °C for different intervals of time. Compounds were characterised by X-ray diffraction, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Rietveld refinements, using FULPROF-Suite software, were carried out to obtain the cell parameters and structural characterisation of products.

AB - In this work a co-precipitation route was used to synthesise two yttria-stabilised-zirconia (YSZ) phases with different concentrations of alumina (Al 2O 3). A tetragonal, with 3 mol% yttria, and a cubic, with 8 mol% yttria, phases were added with alumina in different weight proportions, 90/10, 80/20, 70/30, and 60/40, respectively. After synthesised, products were sintered in a range 800-1100 °C for different intervals of time. Compounds were characterised by X-ray diffraction, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Rietveld refinements, using FULPROF-Suite software, were carried out to obtain the cell parameters and structural characterisation of products.

KW - Co-Precipitation

KW - High Resolution Microscopy

KW - Nanocompound

KW - Rietveld Refinement

KW - Yttria-Stabilised-Zirconia

UR - http://www.scopus.com/inward/record.url?scp=33750174833&partnerID=8YFLogxK

U2 - 10.1166/jnn.2006.334

DO - 10.1166/jnn.2006.334

M3 - Artículo

SN - 1533-4880

VL - 6

SP - 2103

EP - 2109

JO - Journal of Nanoscience and Nanotechnology

JF - Journal of Nanoscience and Nanotechnology

IS - 7

ER -

Synthesis and characterisation of YSZ-Al ₂O ₃ nanostructured materials

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this