Performance of the silicon carbide coating under erosion wear by erosion by solid particles

M. Vite-Torres, Z. Martínez-Arriero, E. A. Gallardo-Hernández, C. Sedano-de la Rosa, M. D. Castillo-Sánchez, C. Lasorsa

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

© 2017, American Coatings Association. In this article, the phenomenon of erosion by solid particles on the silicon carbide coating (SiC) deposited on AISI 304 stainless steel substrates was analyzed. The specimens used were 25 mm square and 3 mm thick, using 300–450 μm silicon carbide as abrasive particles. Experimental tests were performed on an apparatus developed in accordance with some parameters of the ASTM G76-95 standard. Four angles of impact at 30°, 45°, 60°, and 90° are contemplated with an approximate particle velocity of 25 ± 2 m/s with a maximum exposure time of 10 min per specimen, taking measurements of weight intervals every 2 min to determine the mass loss. The wear mechanisms that were identified to small angles were: plastic deformation, displacement of material, and plow mechanisms. While at higher impact angles, the mechanisms were mainly: cutting, pitting, fractures, and cracks. It was observed that the rate of erosion depends on the angle of incidence of the abrasive particles. The results indicated that a higher damage zone was obtained at 30° of impact angle; on the other hand, at an angle of 90° there was less damage.
Original languageAmerican English
Pages (from-to)863-868
Number of pages776
JournalJournal of Coatings Technology and Research
DOIs
StatePublished - 1 Jul 2017

Fingerprint

Abrasives
Silicon carbide
silicon carbides
erosion
Erosion
Wear of materials
coatings
Coatings
Stainless Steel
Pitting
Plastics
Plastic deformation
Stainless steel
abrasives
Cracks
Weights and Measures
Incidence
Substrates
plows
damage

Cite this

Vite-Torres, M. ; Martínez-Arriero, Z. ; Gallardo-Hernández, E. A. ; Sedano-de la Rosa, C. ; Castillo-Sánchez, M. D. ; Lasorsa, C. / Performance of the silicon carbide coating under erosion wear by erosion by solid particles. In: Journal of Coatings Technology and Research. 2017 ; pp. 863-868.
@article{60211d131cd24214baef3791a154bd77,
title = "Performance of the silicon carbide coating under erosion wear by erosion by solid particles",
abstract = "{\circledC} 2017, American Coatings Association. In this article, the phenomenon of erosion by solid particles on the silicon carbide coating (SiC) deposited on AISI 304 stainless steel substrates was analyzed. The specimens used were 25 mm square and 3 mm thick, using 300–450 μm silicon carbide as abrasive particles. Experimental tests were performed on an apparatus developed in accordance with some parameters of the ASTM G76-95 standard. Four angles of impact at 30°, 45°, 60°, and 90° are contemplated with an approximate particle velocity of 25 ± 2 m/s with a maximum exposure time of 10 min per specimen, taking measurements of weight intervals every 2 min to determine the mass loss. The wear mechanisms that were identified to small angles were: plastic deformation, displacement of material, and plow mechanisms. While at higher impact angles, the mechanisms were mainly: cutting, pitting, fractures, and cracks. It was observed that the rate of erosion depends on the angle of incidence of the abrasive particles. The results indicated that a higher damage zone was obtained at 30° of impact angle; on the other hand, at an angle of 90° there was less damage.",
author = "M. Vite-Torres and Z. Mart{\'i}nez-Arriero and Gallardo-Hern{\'a}ndez, {E. A.} and {Sedano-de la Rosa}, C. and Castillo-S{\'a}nchez, {M. D.} and C. Lasorsa",
year = "2017",
month = "7",
day = "1",
doi = "10.1007/s11998-017-9950-5",
language = "American English",
pages = "863--868",
journal = "Journal of Coatings Technology and Research",
issn = "1547-0091",
publisher = "Springer New York",

}

Performance of the silicon carbide coating under erosion wear by erosion by solid particles. / Vite-Torres, M.; Martínez-Arriero, Z.; Gallardo-Hernández, E. A.; Sedano-de la Rosa, C.; Castillo-Sánchez, M. D.; Lasorsa, C.

In: Journal of Coatings Technology and Research, 01.07.2017, p. 863-868.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Performance of the silicon carbide coating under erosion wear by erosion by solid particles

AU - Vite-Torres, M.

AU - Martínez-Arriero, Z.

AU - Gallardo-Hernández, E. A.

AU - Sedano-de la Rosa, C.

AU - Castillo-Sánchez, M. D.

AU - Lasorsa, C.

PY - 2017/7/1

Y1 - 2017/7/1

N2 - © 2017, American Coatings Association. In this article, the phenomenon of erosion by solid particles on the silicon carbide coating (SiC) deposited on AISI 304 stainless steel substrates was analyzed. The specimens used were 25 mm square and 3 mm thick, using 300–450 μm silicon carbide as abrasive particles. Experimental tests were performed on an apparatus developed in accordance with some parameters of the ASTM G76-95 standard. Four angles of impact at 30°, 45°, 60°, and 90° are contemplated with an approximate particle velocity of 25 ± 2 m/s with a maximum exposure time of 10 min per specimen, taking measurements of weight intervals every 2 min to determine the mass loss. The wear mechanisms that were identified to small angles were: plastic deformation, displacement of material, and plow mechanisms. While at higher impact angles, the mechanisms were mainly: cutting, pitting, fractures, and cracks. It was observed that the rate of erosion depends on the angle of incidence of the abrasive particles. The results indicated that a higher damage zone was obtained at 30° of impact angle; on the other hand, at an angle of 90° there was less damage.

AB - © 2017, American Coatings Association. In this article, the phenomenon of erosion by solid particles on the silicon carbide coating (SiC) deposited on AISI 304 stainless steel substrates was analyzed. The specimens used were 25 mm square and 3 mm thick, using 300–450 μm silicon carbide as abrasive particles. Experimental tests were performed on an apparatus developed in accordance with some parameters of the ASTM G76-95 standard. Four angles of impact at 30°, 45°, 60°, and 90° are contemplated with an approximate particle velocity of 25 ± 2 m/s with a maximum exposure time of 10 min per specimen, taking measurements of weight intervals every 2 min to determine the mass loss. The wear mechanisms that were identified to small angles were: plastic deformation, displacement of material, and plow mechanisms. While at higher impact angles, the mechanisms were mainly: cutting, pitting, fractures, and cracks. It was observed that the rate of erosion depends on the angle of incidence of the abrasive particles. The results indicated that a higher damage zone was obtained at 30° of impact angle; on the other hand, at an angle of 90° there was less damage.

UR - https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85020693728&origin=inward

UR - https://www.scopus.com/inward/citedby.uri?partnerID=HzOxMe3b&scp=85020693728&origin=inward

U2 - 10.1007/s11998-017-9950-5

DO - 10.1007/s11998-017-9950-5

M3 - Article

SP - 863

EP - 868

JO - Journal of Coatings Technology and Research

JF - Journal of Coatings Technology and Research

SN - 1547-0091

ER -