Heat transfer monitoring by means of the hot wire technique and finite element analysis software

J. Hernández Wong; V. Suarez; J. Guarachi; A. Calderón; J. B. Rojas-Trigos; A. G. Juárez; E. Marín

doi:10.1016/j.apradiso.2013.04.003

Heat transfer monitoring by means of the hot wire technique and finite element analysis software

J. Hernández Wong, V. Suarez, J. Guarachi, A. Calderón, J. B. Rojas-Trigos, A. G. Juárez, E. Marín

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

It is reported the study of the radial heat transfer in a homogeneous and isotropic substance with a heat linear source in its axial axis. For this purpose, the hot wire characterization technique has been used, in order to obtain the temperature distribution as a function of radial distance from the axial axis and time exposure. Also, the solution of the transient heat transport equation for this problem was obtained under appropriate boundary conditions, by means of finite element technique. A comparison between experimental, conventional theoretical model and numerical simulated results is done to demonstrate the utility of the finite element analysis simulation methodology in the investigation of the thermal response of substances.

Original language	English
Pages (from-to)	264-267
Number of pages	4
Journal	Applied Radiation and Isotopes
Volume	83
DOIs	https://doi.org/10.1016/j.apradiso.2013.04.003
State	Published - Jan 2014
Externally published	Yes

Keywords

Finite element analysis
Heat transfer
Hot wire

Access to Document

10.1016/j.apradiso.2013.04.003

Cite this

@article{703e7c8915734444ab54d7b41dec2a2b,

title = "Heat transfer monitoring by means of the hot wire technique and finite element analysis software",

abstract = "It is reported the study of the radial heat transfer in a homogeneous and isotropic substance with a heat linear source in its axial axis. For this purpose, the hot wire characterization technique has been used, in order to obtain the temperature distribution as a function of radial distance from the axial axis and time exposure. Also, the solution of the transient heat transport equation for this problem was obtained under appropriate boundary conditions, by means of finite element technique. A comparison between experimental, conventional theoretical model and numerical simulated results is done to demonstrate the utility of the finite element analysis simulation methodology in the investigation of the thermal response of substances.",

keywords = "Finite element analysis, Heat transfer, Hot wire",

author = "{Hern{\'a}ndez Wong}, J. and V. Suarez and J. Guarachi and A. Calder{\'o}n and Rojas-Trigos, {J. B.} and Ju{\'a}rez, {A. G.} and E. Mar{\'i}n",

note = "Funding Information: The authors would like to thank to Consejo Nacional de Ciencia y Tecnolog{\'i}a (CONACyT) of M{\'e}xico through grants 83289 and 168290, to Secretaria de Investigaci{\'o}n y Posgrado (SIP) from Instituto Polit{\'e}cnico Nacional (IPN) of M{\'e}xico for its support to this work with multidisciplinary project SIP-IPN 1491. The support from COFAA-IPN through the SIBE and PIFI programs is also acknowledged.",

year = "2014",

month = jan,

doi = "10.1016/j.apradiso.2013.04.003",

language = "Ingl{\'e}s",

volume = "83",

pages = "264--267",

journal = "Applied Radiation and Isotopes",

issn = "0969-8043",

}

TY - JOUR

T1 - Heat transfer monitoring by means of the hot wire technique and finite element analysis software

AU - Hernández Wong, J.

AU - Suarez, V.

AU - Guarachi, J.

AU - Calderón, A.

AU - Rojas-Trigos, J. B.

AU - Juárez, A. G.

AU - Marín, E.

N1 - Funding Information: The authors would like to thank to Consejo Nacional de Ciencia y Tecnología (CONACyT) of México through grants 83289 and 168290, to Secretaria de Investigación y Posgrado (SIP) from Instituto Politécnico Nacional (IPN) of México for its support to this work with multidisciplinary project SIP-IPN 1491. The support from COFAA-IPN through the SIBE and PIFI programs is also acknowledged.

PY - 2014/1

Y1 - 2014/1

N2 - It is reported the study of the radial heat transfer in a homogeneous and isotropic substance with a heat linear source in its axial axis. For this purpose, the hot wire characterization technique has been used, in order to obtain the temperature distribution as a function of radial distance from the axial axis and time exposure. Also, the solution of the transient heat transport equation for this problem was obtained under appropriate boundary conditions, by means of finite element technique. A comparison between experimental, conventional theoretical model and numerical simulated results is done to demonstrate the utility of the finite element analysis simulation methodology in the investigation of the thermal response of substances.

AB - It is reported the study of the radial heat transfer in a homogeneous and isotropic substance with a heat linear source in its axial axis. For this purpose, the hot wire characterization technique has been used, in order to obtain the temperature distribution as a function of radial distance from the axial axis and time exposure. Also, the solution of the transient heat transport equation for this problem was obtained under appropriate boundary conditions, by means of finite element technique. A comparison between experimental, conventional theoretical model and numerical simulated results is done to demonstrate the utility of the finite element analysis simulation methodology in the investigation of the thermal response of substances.

KW - Finite element analysis

KW - Heat transfer

KW - Hot wire

UR - http://www.scopus.com/inward/record.url?scp=84889098808&partnerID=8YFLogxK

U2 - 10.1016/j.apradiso.2013.04.003

DO - 10.1016/j.apradiso.2013.04.003

M3 - Artículo

SN - 0969-8043

VL - 83

SP - 264

EP - 267

JO - Applied Radiation and Isotopes

JF - Applied Radiation and Isotopes

ER -

Heat transfer monitoring by means of the hot wire technique and finite element analysis software

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this