Growth and characterization of CuGaxIn1-xSe2 thin films for solar cells

A. Nur Salad, N. Romeo, G. Sberveglieri, O. Vigil, L. Zanotti

Research output: Contribution to journalArticlepeer-review

5 Scopus citations

Abstract

CuGaxIn1-xSe2 thin films have been prepared by using two different methods, that is: the direct evaporation of the compound and the flash evaporation. The best results have been obtained by using the second method. Thin films, whose forbidden gap is almost equal to that of the corrisponding single crystal with a resistivity of about 10 ω · cm or less and a hole mobility of about 1 cm2 V-1 sec-1, were easily obtained by the flash evaporation method. The films exhibit a dark colour with very smooth surfaces. Finally, we prepared an heterojunction by depositing a CuGaxIn1-xSe2 compound, in which the x value is 0.7, on an Al-doped ZnSe single crystal. For this heterojunction the lattice mismatch is near zero.

Original languageEnglish
Pages (from-to)549-555
Number of pages7
JournalMaterials Chemistry
Volume4
Issue number3
DOIs
StatePublished - Sep 1979
Externally publishedYes

Fingerprint

Dive into the research topics of 'Growth and characterization of CuGaxIn1-xSe2 thin films for solar cells'. Together they form a unique fingerprint.

Cite this