Design of a test bed for teaching/research purposes in PHEVs

Irwin A. Diaz-Diaz, Yuz A. Zuñiga-Ventura, Ilse Cervantes, Noé Villa-Villaseñor

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, the design of a measurement system for teaching and research purposes in plug-in hybrid electric vehicles is presented. The implemented measurement system monitors the interest variables such as current, voltage, power consumption, battery temperature and state of charge, among many others. The test bed uses a Controller Area Network with a proposed protocol for each device. The developed system is reconfigurable allowing to test different powertrain configurations. Also, the system can be useful in the implementation of control laws, energy management strategies or vehicle-to-grid or to-home applications.

Original languageEnglish
Title of host publicationProceedings
Subtitle of host publicationIECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages3021-3026
Number of pages6
ISBN (Electronic)9781509066841
DOIs
StatePublished - 26 Dec 2018
Externally publishedYes
Event44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018 - Washington, United States
Duration: 20 Oct 201823 Oct 2018

Publication series

NameProceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society

Conference

Conference44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018
CountryUnited States
CityWashington
Period20/10/1823/10/18

Fingerprint

Measurement System
Testbed
Teaching
Plug-in hybrid vehicles
Hybrid Electric Vehicle
Energy Management
Powertrains
Energy management
Plug-in
Battery
Power Consumption
Monitor
Electric power utilization
Voltage
Charge
Grid
Controller
Controllers
Configuration
Electric potential

Keywords

  • CAN bus
  • Energy storage system
  • Plug-in Hybrid Electric Vehicle

Cite this

Diaz-Diaz, I. A., Zuñiga-Ventura, Y. A., Cervantes, I., & Villa-Villaseñor, N. (2018). Design of a test bed for teaching/research purposes in PHEVs. In Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (pp. 3021-3026). [8591384] (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IECON.2018.8591384
Diaz-Diaz, Irwin A. ; Zuñiga-Ventura, Yuz A. ; Cervantes, Ilse ; Villa-Villaseñor, Noé. / Design of a test bed for teaching/research purposes in PHEVs. Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 3021-3026 (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).
@inproceedings{2e485cb3e908467fa283540b34cf96b1,
title = "Design of a test bed for teaching/research purposes in PHEVs",
abstract = "In this paper, the design of a measurement system for teaching and research purposes in plug-in hybrid electric vehicles is presented. The implemented measurement system monitors the interest variables such as current, voltage, power consumption, battery temperature and state of charge, among many others. The test bed uses a Controller Area Network with a proposed protocol for each device. The developed system is reconfigurable allowing to test different powertrain configurations. Also, the system can be useful in the implementation of control laws, energy management strategies or vehicle-to-grid or to-home applications.",
keywords = "CAN bus, Energy storage system, Plug-in Hybrid Electric Vehicle",
author = "Diaz-Diaz, {Irwin A.} and Zu{\~n}iga-Ventura, {Yuz A.} and Ilse Cervantes and No{\'e} Villa-Villase{\~n}or",
year = "2018",
month = "12",
day = "26",
doi = "10.1109/IECON.2018.8591384",
language = "Ingl{\'e}s",
series = "Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "3021--3026",
booktitle = "Proceedings",
address = "Estados Unidos",

}

Diaz-Diaz, IA, Zuñiga-Ventura, YA, Cervantes, I & Villa-Villaseñor, N 2018, Design of a test bed for teaching/research purposes in PHEVs. in Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society., 8591384, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, Institute of Electrical and Electronics Engineers Inc., pp. 3021-3026, 44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018, Washington, United States, 20/10/18. https://doi.org/10.1109/IECON.2018.8591384

Design of a test bed for teaching/research purposes in PHEVs. / Diaz-Diaz, Irwin A.; Zuñiga-Ventura, Yuz A.; Cervantes, Ilse; Villa-Villaseñor, Noé.

Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 2018. p. 3021-3026 8591384 (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design of a test bed for teaching/research purposes in PHEVs

AU - Diaz-Diaz, Irwin A.

AU - Zuñiga-Ventura, Yuz A.

AU - Cervantes, Ilse

AU - Villa-Villaseñor, Noé

PY - 2018/12/26

Y1 - 2018/12/26

N2 - In this paper, the design of a measurement system for teaching and research purposes in plug-in hybrid electric vehicles is presented. The implemented measurement system monitors the interest variables such as current, voltage, power consumption, battery temperature and state of charge, among many others. The test bed uses a Controller Area Network with a proposed protocol for each device. The developed system is reconfigurable allowing to test different powertrain configurations. Also, the system can be useful in the implementation of control laws, energy management strategies or vehicle-to-grid or to-home applications.

AB - In this paper, the design of a measurement system for teaching and research purposes in plug-in hybrid electric vehicles is presented. The implemented measurement system monitors the interest variables such as current, voltage, power consumption, battery temperature and state of charge, among many others. The test bed uses a Controller Area Network with a proposed protocol for each device. The developed system is reconfigurable allowing to test different powertrain configurations. Also, the system can be useful in the implementation of control laws, energy management strategies or vehicle-to-grid or to-home applications.

KW - CAN bus

KW - Energy storage system

KW - Plug-in Hybrid Electric Vehicle

UR - http://www.scopus.com/inward/record.url?scp=85061524234&partnerID=8YFLogxK

U2 - 10.1109/IECON.2018.8591384

DO - 10.1109/IECON.2018.8591384

M3 - Contribución a la conferencia

AN - SCOPUS:85061524234

T3 - Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society

SP - 3021

EP - 3026

BT - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Diaz-Diaz IA, Zuñiga-Ventura YA, Cervantes I, Villa-Villaseñor N. Design of a test bed for teaching/research purposes in PHEVs. In Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc. 2018. p. 3021-3026. 8591384. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society). https://doi.org/10.1109/IECON.2018.8591384