CO2 Separation Improvement Produced on a Ceramic-Carbonate Dense Membrane Superficially Modified with Au-Pd

Oscar Ovalle-Encinia, Heriberto Pfeiffer, José Ortiz-Landeros

Research output: Contribution to journalArticlepeer-review

17 Scopus citations

Abstract

Ceramic-carbonate membranes have been proposed for the selective separation of CO2. In previous reports, membranes performance has been enhanced through the improvement of microstructural features and conductivity properties. Different to the aforesaid, this paper was focused on modifying the membrane surface by incorporating metallic particles to promote the involved surface reactions. First, a composite made of a Ce0.85Sm0.15O2-δ and Sm0.6Sr0.4Al0.3Fe0.7O3-δ was chemically synthesized. Then porous supports were obtained by pressing powders and sintering. Then, dense membranes were fabricated by infiltration of the supports with molten carbonates and the subsequent deposition of metallic Au-Pd particles on the membrane feed side surface. Obtained membranes were tested for CO2 separation between 700 °C and 900 °C, using different feed gas mixtures. Membranes show excellent CO2 permeance (1.72 × 10-7 mol m-2 s-1 Pa-1) operating at low CO2 partial pressure in the feed side (PCO2 = 0.115 atm), wherein about 24% of the total permeation values resulted from the surface modification approach. The permeation mechanism is discussed on the basis of these results.

Original languageEnglish
Pages (from-to)9261-9268
Number of pages8
JournalIndustrial and Engineering Chemistry Research
Volume57
Issue number28
DOIs
StatePublished - 18 Jul 2018
Externally publishedYes

Fingerprint

Dive into the research topics of 'CO2 Separation Improvement Produced on a Ceramic-Carbonate Dense Membrane Superficially Modified with Au-Pd'. Together they form a unique fingerprint.

Cite this