Analysis, simulation and physical implementation: Modified-SEPIC DC/DC converter

Leobardo Hernández González, Zabdiel Brito Brito, Diana S.Vázquez Estrada

Research output: Contribution to conferencePaper

7 Scopus citations

Abstract

The present paper presents a methodology and electronic analysis in PSPICE for a CD/CD converter with Power Factor Correction (PFC); it is presenting the comparation between the simulated and experimental results. A SEPIC topology is used but with a modification with respects the common configuration in which the second inductor is built as a self transformer with a higher voltage between the external ends an a lower voltage at the middle of the inductor. Beside that the circuit includes an integrated circuit for correcting the power factor, the MC33262. The entire system was simulated and later it was probed in the laboratory where it seems to be working properly. © 2005 IEEE.
Original languageAmerican English
Pages389-392
Number of pages349
DOIs
StatePublished - 1 Dec 2005
Event2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005 -
Duration: 1 Dec 2005 → …

Conference

Conference2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005
Period1/12/05 → …

    Fingerprint

Cite this

González, L. H., Brito, Z. B., & Estrada, D. S. V. (2005). Analysis, simulation and physical implementation: Modified-SEPIC DC/DC converter. 389-392. Paper presented at 2nd International Conference on Electrical and Electronics Engineering, ICEEE and XI Conference on Electrical Engineering, CIE 2005, . https://doi.org/10.1109/ICEEE.2005.1529651